The dwarven army axe is a powerful weapon for any dwarven warrior, but with the right upgrades, it can become an unstoppable force on the battlefield. Whether you’re a blacksmith looking to enhance its abilities or a warrior preparing for an epic quest, this guide will show you step-by-step how to upgrade your dwarven army axe to unlock its full potential.
First, it’s important to note that upgrading a dwarven army axe requires a high level of skill and knowledge in blacksmithing. If you’re unfamiliar with the craft, it’s recommended to seek assistance from an experienced blacksmith who can guide you through the process. However, if you’re up to the challenge, let’s dive into the upgrade process.
The first step is to gather the necessary materials. To upgrade your dwarven army axe, you’ll need pristine dwarven steel, rare gems such as diamonds or rubies, and various enchanted materials. These materials can be obtained through mining, exploring treacherous dungeons, or purchasing them from reputable enchanters.
Once you have acquired the necessary materials, the next step is to prepare the blade for the upgrade. Carefully remove the axe head from the handle and inspect it for any signs of wear or damage. Use a fine-grit sandpaper to smooth out any imperfections and restore the blade to its original sharpness.
How to Upgrade Dwarven Army Axe
Dwarven Army Axe is a powerful weapon in the game, with the potential to become even more formidable if upgraded properly. Here are the steps to follow to upgrade your Dwarven Army Axe:
- First, you need to find a Dwarven smith who is skilled in weapon upgrading. They can usually be found in dwarven cities or fortresses.
- Once you have found a suitable smith, approach them and ask them if they are willing to upgrade your weapon. It is advisable to have some gold on hand, as upgrading weapons can be a costly process.
- Hand over your Dwarven Army Axe to the smith and let them inspect it. They will analyze the current state of the weapon and determine what improvements can be made.
- The smith will then suggest a series of upgrades that can be done on the axe. These upgrades can vary depending on the smith’s skill level and the resources available. Some common upgrades include strengthening the blade, enhancing the handle grip, or adding magical runes for extra damage.
- Once you have agreed on the upgrades, the smith will start working on your Dwarven Army Axe. This process may take some time, so be patient and check in with the smith regularly to see how it’s progressing.
- Once the upgrades are complete, the smith will present you with your newly upgraded Dwarven Army Axe. Take a moment to inspect the weapon and ensure that the upgrades have been done to your satisfaction.
- Now that you have a more powerful weapon, take it out for a test run! Notice the improved speed, accuracy, and damage inflicted on your enemies. Your upgraded Dwarven Army Axe will surely be a force to be reckoned with on the battlefield!
Remember, upgrading a Dwarven Army Axe is a complex and time-consuming process. It requires the skills of a talented Dwarven smith and a significant investment of resources. However, the end result is a weapon that is far superior to its original form and will greatly aid you in your adventures.
Materials and Tools Needed
Upgrading a dwarven army axe requires a few specific materials and tools. Here is a list of what you will need:
Materials:
- A dwarven army axe
- Upgrade components (such as dragon metal or rare gemstones)
- Acidic solution for cleaning
- Oil for lubrication
Tools:
- A sturdy workbench
- A hammer and chisel for shaping
- A file for smoothing the edges
- A grinding stone for sharpening the blade
- A heat source (such as a forge or fire)
- A pair of tongs for handling hot materials
- Safety goggles and gloves
Make sure to gather all the necessary materials and have the tools readily available before starting the upgrade process. It is important to work in a well-ventilated area and take necessary safety precautions when handling the materials and using the tools. Following these steps and using the right materials and tools will ensure a successful upgrade of your dwarven army axe.
Disassembling the Axe
To upgrade your dwarven army axe, you first need to disassemble it. Disassembling the axe will allow you to access its different parts and make the necessary modifications.
Here is a step-by-step guide on how to disassemble your dwarven army axe:
- Start by removing the axe from its handle. Use a wrench or pliers to loosen and remove the screws or bolts that hold the two parts together.
- Once the axe head is detached from the handle, carefully examine the different components. These may include the blade, the socket, and any additional parts.
- Inspect the blade for any signs of wear or damage. If necessary, sharpen the blade using a file or whetstone. Make sure to follow the proper sharpening technique to maintain the blade’s sharpness and shape.
- Check the socket of the axe head and ensure it is clean and free from any debris or rust. Use a brush or cloth to remove any dirt or corrosion.
- If you want to upgrade the handle, you can replace it with a new one or make modifications to the existing handle. Measure the length and diameter of the handle to ensure the replacement fits correctly.
- Once you have made all the necessary modifications and upgrades, reassemble the axe by aligning the axe head with the handle. Use the screws or bolts to secure the two parts together.
- Finally, test the axe to ensure it functions properly. Swing it a few times to check its balance and stability. If needed, make further adjustments until you are satisfied with the upgraded axe.
Remember to take necessary safety precautions when disassembling and working with sharp tools. Wear protective gloves and eyewear to prevent any accidents or injuries.
By following these steps, you will be able to disassemble your dwarven army axe and upgrade it to better suit your needs.
Cleaning and Polishing
Keeping your dwarven army axe clean and polished is essential for maintaining its durability and performance. Regular cleaning and polishing will not only remove dirt and grime but also help prevent rust and corrosion.
Cleaning
Before polishing your dwarven army axe, you need to clean it thoroughly. Start by removing any loose dirt and debris using a soft cloth or a brush. To remove stubborn dirt and grease, you can use a mild detergent mixed with warm water. Gently scrub the axe with the solution using a soft brush or sponge, making sure to reach all the nooks and crevices. Rinse the axe with clean water and pat it dry with a towel.
Polishing
Once your dwarven army axe is clean and dry, it’s time to polish it. You can use a metal polish or a specialized axe polish for this purpose. Apply a small amount of polish onto a soft cloth and rub it onto the axe’s metal surface in circular motions. Make sure to cover the entire surface, including the blade, handle, and any other metal parts. Continue polishing until you achieve the desired shine.
After polishing, wipe off any excess polish with a clean cloth. To give your dwarven army axe an extra shine, you can use a buffing cloth or a microfiber cloth to buff the metal surface. This will help remove any remaining polish residue and make the axe look even more polished and lustrous.
Remember to store your clean and polished dwarven army axe in a dry place to prevent moisture and humidity from causing rust or corrosion. With regular cleaning and polishing, your dwarven army axe will not only look great but also last for generations to come.
Reinforcing the Handle
The handle of a dwarf army axe is an essential part of the weapon, as it allows the wielder to have a firm grip and control during combat. However, over time, the handle may wear out or become weakened, necessitating reinforcement to ensure its durability.
Choosing the Right Material
When reinforcing the handle of a dwarven army axe, it is important to choose the right material. A strong, sturdy wood such as hickory or oak is recommended for this purpose. These types of wood are known for their ability to withstand heavy impacts and provide excellent longevity.
Applying the Reinforcement
To reinforce the axe handle, begin by removing any dirt or debris from the surface. Then, using a saw or file, carefully carve a small groove along the length of the handle. This groove will serve as the channel for the reinforcement material.
Next, cut a piece of the chosen wood material to fit the length of the groove. Apply a strong adhesive to the inside of the groove, ensuring it is evenly distributed. Insert the piece of wood into the groove, pressing it firmly to create a secure bond with the handle.
Once the adhesive has dried, sand the handle to smooth out any rough edges and create a seamless finish. This will allow for a comfortable grip when using the axe.
Finally, consider adding a protective finish to the handle to enhance its durability and prevent moisture damage. Applying a coat of varnish or oil can help protect the wood from wear and tear.
By reinforcing the handle of a dwarven army axe, you can ensure its longevity and maintain a strong, reliable weapon for battle.
Sharpening the Blade
One of the most crucial aspects of upgrading your dwarven army axe is sharpening the blade. A sharp blade not only ensures a cleaner cut but also increases the efficiency and effectiveness of the weapon. Here are some steps to help you sharpen your dwarven army axe:
1. Gather the necessary tools:
– A sharpening stone or whetstone
– Lubricating oil or water
– A clean cloth or towel
2. Prepare the blade for sharpening:
– Start by wiping the blade clean using a cloth or towel to remove any dirt or debris. This will allow you to see any imperfections or damages on the blade.
– Inspect the blade for any nicks, chips, or dull spots. These areas will require more attention during the sharpening process.
3. Apply lubrication:
– Depending on the type of sharpening stone or whetstone you are using, apply either lubricating oil or water to the surface of the stone. This will help prevent the formation of metal shavings and keep the blade cool during sharpening.
4. Hold the axe properly:
– Secure the axe handle using a vise or clamp to provide stability during sharpening.
– Grasp the axe head firmly, ensuring a strong grip and maintaining control over the blade.
5. Sharpen the blade:
– Place the blade on the sharpening stone or whetstone at a 20-degree angle. The angle may vary depending on your desired sharpness.
– Gently move the blade along the stone in a smooth and consistent motion, starting from the base of the blade and moving towards the tip. Repeat this process several times, paying extra attention to any damaged or dull areas.
– Flip the blade over and repeat the sharpening process on the other side.
6. Test the sharpness:
– After sharpening, carefully run your finger along the blade’s edge. If it feels smooth and sharp, then you have successfully sharpened your dwarven army axe. If not, repeat the sharpening process until you achieve the desired sharpness.
Note: It’s important to be cautious when handling sharp objects. Always wear protective gloves and follow safety guidelines while sharpening your dwarven army axe.
Sharpening the blade of your dwarven army axe is a skill that requires practice and patience. By following these steps and regularly maintaining your weapon, you can ensure that your axe remains sharp and ready for any battle.
