Changing the blade on a Skilsaw circular saw is a relatively simple process that can be done in just a few easy steps. Whether you’re a professional carpenter or a DIY enthusiast, knowing how to change the blade on your saw is an essential skill to have.
Before you begin, it’s important to ensure that your saw is turned off and unplugged from the power source to prevent any accidents.
Start by locating the blade lock button on your Skilsaw circular saw. This button is usually located on the left side of the saw, near the blade guard. Press and hold the blade lock button to immobilize the blade.
Once the blade is locked in place, use a wrench to loosen the bolt that secures the blade to the saw. Turn the wrench counterclockwise to loosen the bolt and remove it completely.
With the bolt removed, carefully slide the old blade off the arbor and set it aside. Take note of the direction the teeth are facing for the installation of the new blade.
Now, it’s time to install the new blade. Place the new blade onto the arbor, aligning the holes on the blade with the threaded hole on the saw’s arbor.
Once the blade is in place, reinsert the bolt and use the wrench to tighten it securely. Make sure the blade is aligned and tightened properly before moving on.
Finally, release the blade lock button to unlock the blade. Give the blade a quick spin to ensure it’s functioning properly, and you’re all set!
Remember, always wear the proper safety gear, such as safety goggles and gloves, when working with power tools. It’s also a good idea to refer to your Skilsaw circular saw’s user manual for specific instructions and precautions.
By following these steps, you’ll be able to easily change the blade on your Skilsaw circular saw and continue with your woodworking projects efficiently and safely.
How to Change Blade on Skilsaw Circular Saw
Changing the blade on a Skilsaw circular saw is a simple process that can be done with a few basic steps. Follow the instructions below to safely and efficiently change the blade on your Skilsaw circular saw.
Step 1: Prepare the Saw
Before you begin, make sure the saw is unplugged or the battery is removed to prevent any accidental starts. Place the saw on a flat surface and secure it in place.
Step 2: Locate the Blade Lock
Look for the blade lock button or lever on the side of the saw near the blade. This is used to lock the blade in place while you remove and replace it.
Step 3: Engage the Blade Lock
Press and hold the blade lock button or lever to engage the lock. This will prevent the blade from turning while you loosen the blade nut.
Step 4: Loosen the Blade Nut
Using a wrench or the provided blade changing tool, loosen the blade nut in a counterclockwise direction. Be sure to hold the blade steady as you loosen the nut to prevent any damage or injury.
Step 5: Remove the Old Blade
Once the blade nut is loose, carefully remove the old blade from the saw. Take note of its orientation if it’s reversible, as you will need to install the new blade in the same orientation.
Step 6: Install the New Blade
Take the new blade and place it on the saw, aligning the center hole with the blade shaft. Make sure the teeth of the blade are facing in the correct direction as indicated by any arrow or marking on the blade.
Step 7: Tighten the Blade Nut
Using the wrench or blade changing tool, tighten the blade nut in a clockwise direction. Make sure it is secure, but be careful not to overtighten it, as this can damage the blade or the saw.
Step 8: Test the Saw
Once the blade nut is tightened, disengage the blade lock and give the saw a quick test to ensure the blade is properly installed and secured. It should rotate smoothly and without any wobbling or unusual sounds.
By following these steps, you can easily change the blade on your Skilsaw circular saw, allowing you to continue your woodworking projects with a sharp and efficient cutting tool.
Safety Precautions
When changing the blade on your Skilsaw circular saw, it is important to follow these safety precautions to ensure your own well-being:
1. Disconnect the Power
Before attempting to change the blade, make sure the circular saw is unplugged from the power source. This will prevent any accidental start-up while working on the saw.
2. Wear Safety Gear
Always put on the appropriate safety gear before changing the blade. This should include safety glasses to protect your eyes from any potential debris, gloves to protect your hands, and hearing protection to prevent any potential damage to your ears.
3. Choose a Suitable Work Area
Find a well-lit and spacious work area to change the blade on your circular saw. Ensure the area is clean and free from any clutter that may interfere with your work or cause accidents.
4. Follow the Manufacturer’s Instructions
Each circular saw manufacturer may have specific instructions on how to change the blade. It is essential to read and follow these instructions carefully to ensure proper installation and safe usage.
5. Secure the Blade Guard
Before removing the old blade, make sure that the blade guard is secure and in the correct position. This will provide an added layer of protection against any accidental contact with the blade.
6. Handle the Blade with Care
When removing the old blade and installing the new one, handle the blades with caution. Avoid touching the sharp edges and always use the appropriate tools, such as a wrench, to loosen or tighten the blade.
By following these safety precautions, you can confidently change the blade on your Skilsaw circular saw while prioritizing your safety.
Gathering the Materials
Before you start changing the blade on your Skilsaw circular saw, it’s important to gather all the necessary materials. This will ensure that you have everything you need to complete the task efficiently and safely. Here is a list of the materials you will need:
| Materials | Description |
| Safety goggles | Protective eyewear to shield your eyes from debris |
| Gloves | Work gloves to protect your hands from the sharp blade |
| Replacement blade | A new blade that is compatible with your Skilsaw circular saw |
| Wrench or Allen key | Tool to loosen and tighten the blade arbor bolt |
| Workbench or sturdy surface | A stable area to place your circular saw while changing the blade |
| Soft cloth or rag | To wipe away any dirt or debris from the saw |
By having all these materials ready, you can proceed to the next steps of changing the blade on your Skilsaw circular saw with ease and confidence.
Disconnecting the Power
Before attempting to change the blade on your Skilsaw circular saw, it is crucial to disconnect the power to ensure your safety. Follow these steps:
- Locate the power cord of the circular saw.
- Check if the saw is turned off and unplugged from the power outlet.
- If the saw is cordless, remove the battery to disconnect the power source.
Ensuring that the power is disconnected will prevent any accidental start-ups and reduce the risk of electric shock while working on the saw blade.
Cautionary Note:
Always exercise caution and double-check that the power is fully disconnected before proceeding to avoid any potential accidents or injuries.
Removing the Old Blade
Before you begin, make sure the saw is unplugged to avoid any accidents. Safety should always be your top priority.
1. Locate the blade lock button or lever on your skilsaw circular saw. It is usually positioned near the base of the saw, close to where the blade meets the motor.
2. Press and hold down the blade lock button or lever while you use a wrench or an adjustable wrench to loosen the bolt in the center of the blade. Turn the wrench counterclockwise to loosen the bolt.
3. Once the bolt is loose enough, remove it completely and set it aside in a safe place. Be careful not to misplace it as you will need it to secure the new blade.
4. With the bolt removed, you can now carefully lift and remove the old blade from the saw.
5. Take this opportunity to inspect the blade for any signs of damage or wear. If the blade looks worn out or damaged, it is a good idea to replace it with a new one.
6. Dispose of the old blade properly. Remember that circular saw blades are sharp and can cause injuries if mishandled. Place it in a blade disposal container or wrap it in heavy-duty tape before placing it in a trash bag.
Now that you have successfully removed the old blade, you are ready to install the new one. Read on for the next steps in the process.
Installing the New Blade
Once you have removed the old blade from your Skilsaw circular saw, it’s time to install the new one. Follow these steps to ensure a safe and successful blade installation:
Step 1: Choose the correct blade
Make sure you have selected the correct blade for the material you will be cutting. Refer to the user manual or the packaging of the new blade to ensure it is appropriate for your specific needs.
Step 2: Prepare the saw
Before installing the new blade, make sure you unplug the circular saw from the power source to prevent any accidental starts. Also, make sure the saw is placed on a stable surface.
Step 3: Position the blade
- Locate the blade arbour, which is the threaded metal shaft that holds the blade in place. It is usually located at the center of the saw’s base plate.
- Carefully position the new blade onto the blade arbour, aligning the center hole of the blade with the arbour.
Step 4: Secure the blade
Once the blade is aligned with the arbour, use the blade wrench provided with the Skilsaw to tighten the blade arbour nut. Rotate the nut clockwise to secure the blade in place, but avoid overtightening, as it can damage the saw or make it difficult to remove the blade in the future.
Step 5: Test the blade
Before using the circular saw, give the blade a gentle spin by hand to make sure it rotates freely and doesn’t rub against any other parts. If the blade spins smoothly, you can proceed to plug in the saw and begin your cutting tasks.
Remember to always wear appropriate safety equipment, such as safety goggles and gloves, when handling power tools.
