Looking for a new haircut but don’t want to spend a fortune at the salon? If you’re feeling brave, why not try cutting a wedge haircut yourself? The wedge haircut is a classic style that adds volume and shape to your hair, and it’s surprisingly easy to achieve at home.
Before you begin, gather all the necessary tools: a comb, sharp scissors, and a mirror at the right angle. It’s also a good idea to have a picture of the desired haircut as a reference. Remember, confidence is key! Don’t worry if it doesn’t turn out perfectly – hair grows back, and you can always get it fixed later if needed.
To start, dampen your hair and part it down the middle. Comb through to remove any tangles. Take a small section of hair at the top and hold it straight up. Using your scissors, make small vertical cuts upward to create texture and volume.
Continue working your way down to the back of your head, cutting each section at the desired length. Make sure to check the balance by frequently looking in the mirror. If you’re unsure, it’s always better to cut less rather than too much, as you can always go back and trim more. Once you’ve finished cutting the back, move to the sides and repeat the process.
Step-by-Step Guide: Cutting a Wedge Haircut Yourself
Cutting your own hair can be a bit nerve-wracking, but with the right tools and a step-by-step guide, you can achieve a professional-looking wedge haircut at home. Follow these simple instructions to give yourself a fresh and stylish haircut.
Gather Your Tools
Before you start, make sure you have the following tools on hand:
- Sharp scissors
- Comb
- Clippers (optional)
- Hair clips
- Mirror
- Spray bottle with water
- Towel
Prepare Your Hair
Start by washing and drying your hair thoroughly. Comb out any tangles and make sure your hair is completely knot-free. It’s best to work with clean, dry hair to ensure accuracy while cutting.
Create the Basic Shape
Section off the top layer of your hair and clip it away for now. This will give you better control over the haircut. Take the bottom section of your hair and comb it straight down. Then, take your scissors and cut a straight line across the desired length of the wedge, making sure it is level and even.
Add Layers
To create the signature wedge shape, you’ll need to add layers to the back of your haircut. Starting at the back, take a small section of hair between your index and middle fingers. Holding your fingers at a slight angle, make small upward cuts into the hair. Repeat this process, working your way up to create gradual layers.
Blend the Sides
Release the top layer of hair and comb it down. This layer will serve as the longer top section of your wedge haircut. Use your scissors to blend the sides of this top layer with the shorter bottom layer, creating a seamless transition between the two. Be careful to blend the hair in a smooth and natural way.
Finishing Touches
Take a final look in the mirror and make any necessary adjustments to ensure that your wedge haircut is even and symmetrical. If desired, you can use clippers to tidy up the neckline or add any desired details. When you’re satisfied with the result, style your hair as desired using your favorite products.
Congratulations! You have successfully cut a wedge haircut yourself. With a little practice and patience, you’ll be able to achieve professional-looking results in the comfort of your own home.
Gather the necessary tools
Before you begin cutting your wedge haircut, it’s important to gather all the necessary tools. Having the right tools will make the process easier and help you achieve the desired result. Here are the tools you will need:
1. Scissors:
You will need a good pair of sharp haircutting scissors. Choose scissors that are specifically designed for cutting hair, as they have a sharper blade and make clean cuts.
2. Comb:
A wide-toothed comb will come in handy for detangling and sectioning your hair. This will help you achieve a more even and precise cut.
3. Hair clips:
Use hair clips to hold sections of your hair out of the way while you cut. This will help you maintain control and avoid cutting the wrong sections.
4. Mirror:
A hand-held mirror or a larger mirror that allows you to see the back of your head will be essential for checking and adjusting your progress as you cut.
5. Spray bottle:
A spray bottle filled with water will help keep your hair damp while cutting, making it easier to work with and reducing flyaways.
6. Towel or cape:
To protect your clothes from hair clippings, drape a towel or wear a cape to catch any loose hair.
Having all these tools ready before you start cutting will ensure that you have everything you need to successfully achieve a wedge haircut.
Prepare your hair
Before cutting a wedge haircut yourself, it’s important to properly prepare your hair. Here are some steps to follow:
1. Wash your hair
Start by washing your hair with a good-quality shampoo and conditioner. This will help remove any dirt, oils, and product buildup, making your hair easier to work with.
2. Dry your hair
After washing, gently towel dry your hair to remove excess moisture. Avoid rubbing your hair vigorously as this can cause damage and breakage.
If you plan on using heat styling tools, such as a blow dryer or straightener, make sure to apply a heat protectant spray or serum to protect your hair from damage. Allow your hair to air dry or use a blow dryer on a low or cool setting to dry it completely.
3. Comb your hair
Using a wide-toothed comb or a brush specifically designed for wet hair, gently comb through your hair to remove any tangles or knots. Start from the ends of your hair and gradually work your way up to the roots.
If you have particularly thick or curly hair, you may want to section your hair into smaller sections and comb through each section separately to ensure all tangles are removed.
By properly preparing your hair before cutting a wedge haircut, you’ll have a clean and manageable canvas to work with, allowing for a more precise and even cut.
Divide your hair into sections
Before you begin cutting your hair, it’s important to divide it into section. This will make the cutting process much easier and ensure that you achieve a more even result.
Start by parting your hair down the middle, from your forehead to the nape of your neck. This will create two even sections of hair.
Next, take the section of hair in the front and divide it in half horizontally. You can use hair clips or hair ties to keep the sections separate and out of the way.
Repeat this process with the back section of your hair, dividing it in half horizontally as well. Again, use clips or ties to keep the sections separate.
Now that your hair is divided into four even sections, you’re ready to begin cutting your wedge haircut. Having these sections will give you better control and help you achieve a more precise cut.
Start cutting
Now that you have prepared your tools and gathered all the necessary supplies, it’s time to start cutting your wedge haircut. Follow these steps to achieve the desired style:
Step 1: Wet your hair
Start by wetting your hair thoroughly. Use a spray bottle filled with water to dampen your hair evenly. This will make it easier to cut and manipulate your hair.
Step 2: Section your hair
Divide your hair into two equal sections, from the front to the back of your head, using a comb. This will create a clear division and help you maintain symmetry as you cut.
Step 3: Create a guideline
Take a small section of hair from the front section and comb it straight down. Decide on the length you want for your wedge haircut and use the scissors to trim the hair to that length. This will serve as your guideline for the rest of your haircut.
Step 4: Cut the back section
Start cutting the back section of your hair using the guideline you created. Take small sections of hair, comb them straight down, and cut them to the desired length. Work your way from the bottom to the top, making sure to maintain the same length throughout.
Step 5: Cut the front section
Once you have finished cutting the back section, move on to the front section. Follow the same process of taking small sections, combing them straight down, and cutting them to the desired length. Remember to match the length with the back section for a cohesive look.
As you cut, periodically check your progress in a mirror to ensure that both sides are symmetrical and the desired shape is achieved.
Step 6: Refine and style
After you have completed the cutting process, take some time to refine your haircut. Blend any uneven sections and make any necessary adjustments to achieve the desired shape. Once you are satisfied with the cut, you can style your wedge haircut as desired using hair products and styling tools.
Remember, practice makes perfect, so don’t be too hard on yourself if you don’t achieve your ideal wedge haircut on your first try. With time and experience, you will improve your cutting skills and be able to create the perfect wedge haircut for yourself.
| Previous: Gather supplies | Next: Refine and style |
Final touches and styling
Once you have completed the wedge haircut, it’s time to add the final touches and style your hair to perfection. Here are some tips to help you achieve a polished look:
| 1. Blow dry your hair | Use a blow dryer to dry your hair and give it volume. Use a round brush to lift the roots and create shape. |
| 2. Use a styling product | Apply a styling product, such as a texturizing spray or a volumizing mousse, to add definition and hold. Work it through your hair with your fingers or a comb. |
| 3. Create separation | Use your fingers to create separation and texture. This will give your hair a more lived-in and effortless look. |
| 4. Finish with hairspray | Spray a light-hold hairspray all over your hair to set the style and add lasting hold. This will help your hair stay in place throughout the day. |
With these final touches and styling steps, you can rock your wedge haircut with confidence. Experiment with different styling techniques to find the look that suits you best.
