World Edit is a powerful plugin that allows Minecraft players to manipulate their world with ease. One of the essential commands in World Edit is the fill command, which enables players to quickly replace blocks in their world. However, using the fill command with an axe requires a little more knowledge and understanding. In this article, we will guide you through the process of utilizing the fill command with an axe in World Edit.
Firstly, it’s important to note that the fill command in World Edit allows players to replace blocks within a selected region. When using an axe, you can select a region by left-clicking on one corner of the area and right-clicking on the opposite corner. This will create a selection that you can fill with a different block.
Once you have your desired region selected, you can proceed to use the fill command. To start, you need to hold the axe in your hand and execute the fill command by typing /fill in the chat. This command should be followed by the ID or name of the block you want to fill the selected region with. For example, if you want to replace all the grass blocks with stone, you would type /fill stone after the fill command.
Overview of World Edit and the Fill Command
World Edit is a powerful plugin for Minecraft that allows players to manipulate and edit the world using various commands. One of the most commonly used commands in World Edit is the fill command, which allows players to quickly and easily fill a large area with blocks of their choice.
The fill command in World Edit is used by selecting two points within the world, known as the “pos1” and “pos2” points. These points can be set by using the wand tool, which is typically a wooden axe. Once the points are selected, players can use the fill command to specify the type of block they want to fill the area with.
There are several different ways to use the fill command in World Edit. The basic syntax for the command is:
- /fill <block> [data] [place] [replace]
The <block> argument represents the type of block that will be used to fill the area. This can be specified by using the block’s ID or name. The [data] argument is optional and allows players to specify additional data about the block, such as its color or orientation.
The [place] argument is also optional and determines how the blocks will be placed in the area. This can be set to “normal” to place the blocks normally, “hollow” to only fill the outer edges of the area, or “outline” to create a frame around the area. The [replace] argument is also optional and allows players to specify a different block to replace with the new fill blocks.
Once the fill command is executed, the specified area will be filled with the chosen blocks. This can be a useful tool for quickly creating structures, modifying terrain, or even just decorating in-game. It’s important to note that the fill command can only be used within the boundaries set by the pos1 and pos2 points.
Overall, World Edit and the fill command are powerful tools that can greatly enhance and streamline the building experience in Minecraft. By allowing players to quickly and easily fill large areas with blocks of their choice, World Edit makes it possible to bring even the most ambitious building projects to life.
Using the Fill Command with an Axe in World Edit
World Edit is a powerful in-game tool that allows players to quickly and efficiently modify the landscape in Minecraft. One of the most useful commands in World Edit is the fill command, which allows players to replace large sections of blocks with another type of block. By combining the fill command with an axe, players can create unique and detailed structures with ease.
When using the fill command, it is important to have a clear idea of what you want to create. Planning out your structure beforehand can save time and prevent mistakes. Once you have a plan in mind, follow these steps to use the fill command with an axe in World Edit:
- Ensure that you have World Edit installed and enabled on your Minecraft server or client.
- Open the chat window in Minecraft and type “//wand”. This command will give you the World Edit wand, which is necessary for using the fill command.
- With the wand equipped, right-click one corner of the area you want to fill with your axe.
- Walk to the opposite corner of the area and right-click again with your axe. This will select the entire area as your region.
- Type “//replace
” in the chat window, replacing “ ” with the type of block you want to replace and “ ” with the type of block you want to fill with. For example, “//replace stone brick oak planks” will replace all stone brick blocks in the selected region with oak planks. - Press enter to execute the command. World Edit will replace all instances of the old block within the selected region with the new block.
By combining the fill command with an axe, players can quickly create unique structures, change block types, and experiment with different materials in Minecraft. Whether you are building a castle, a park, or a simple house, the fill command with an axe in World Edit can be a valuable tool for any aspiring builder.
Step 1: Selecting the Axe
The first step in using the fill command with WorldEdit and an axe is selecting the axe you want to use. The axe is the tool that you will use to modify and manipulate the blocks in your Minecraft world.
To select the axe, make sure it is in your inventory. You can check your inventory by pressing the “E” key in the game. Once you have confirmed that the axe is in your inventory, you can select it by scrolling through your hotbar using the scroll wheel on your mouse or by pressing the corresponding number key on your keyboard.
It is important to note that not all axes are compatible with the fill command in WorldEdit. Only axes made out of certain materials, such as diamond or iron, can be used with the fill command. Additionally, axes with specific enchantments, like Efficiency or Silk Touch, may also be required for certain fill commands.
Once you have selected the axe you want to use, you are ready to proceed to the next step of using the fill command with WorldEdit.
Step 2: Specifying the Fill Area
Once you have selected the proper axe and have the fill command ready, the next step is to specify the area you want to fill. This will determine the scope and dimensions of the fill command.
To specify the fill area, you will need to use two sets of coordinates: the first set determines the starting point of the fill area, while the second set determines the ending point. These coordinates should be in the format of X Y Z, where X represents the horizontal position, Y represents the vertical position, and Z represents the depth or distance inward.
Here is an example of how to specify the fill area using coordinates:
/fill X1 Y1 Z1 X2 Y2 Z2 block_type
In this example, X1 Y1 Z1 represents the starting point coordinates, while X2 Y2 Z2 represents the ending point coordinates. The block_type will be the Minecraft block type that you want to fill the area with. This can be a specific block type, such as “stone” or “wood”, or a block ID number.
Make sure to replace X1, Y1, Z1, X2, Y2, Z2, and block_type with the appropriate values for your fill area.
It’s important to note that if you want to fill the entire area between two points, you can use the tilde (~) symbol. For example, if you want to fill the area between the starting point and the ending point on the X-axis, you can use:
/fill ~ Y1 Z1 ~ Y2 Z2 block_type
This will automatically fill the entire range of X-coordinate values between the starting and ending points.
Once you have specified the fill area, you can execute the fill command and the specified area will be filled with the desired block type. You can repeat this process as needed to fill multiple areas with different block types.
Remember to double-check your coordinates and block types to ensure that you are filling the correct area with the desired blocks.
Step 3: Defining the Block to Fill
Once you have the fill command and the axe ready, the next step is to define the specific block or area that you want to fill. This can be done by specifying the coordinates or by selecting a region in the Minecraft world.
Option 1: Specifying Coordinates
If you know the exact coordinates of the block or area you want to fill, you can simply input those coordinates into the fill command. The format for specifying coordinates is x y z.
For example, if you want to fill a single block at coordinates 125 64 200 with stone, you would use the following command:
//fill 125 64 200 125 64 200 stoneMake sure to replace stone with the ID or name of the block you want to fill with.
Option 2: Selecting a Region
If you don’t know the specific coordinates but want to fill a larger area, you can use the axe to select a region in the Minecraft world. To do this, follow these steps:
- Hold the axe in your hand and right-click the starting corner of the desired region.
- Move to the opposite corner of the region and left-click with the axe to set the selection.
Once the region is selected, you can use the fill command with the //fill syntax and the selected region will automatically be filled. For example:
//fill stoneThis will fill the selected region with stone blocks.
After deciding on the method to define the block or area you want to fill, you are ready to move on to the next step of using the fill command with WorldEdit.
Step 4: Executing the Fill Command
Once you have determined the area and selected the desired blocks, it’s time to execute the fill command in World Edit using an axe. Follow the steps below to execute the fill command:
Step 1: Obtain the axe
Make sure you have the appropriate axe in your inventory for the fill command. Different types of axes have different attributes, so choose one that suits your needs. For example, a diamond axe is the most durable and efficient.
Step 2: Position yourself
Stand in the location from where you want to start filling the selected area. This position will act as the reference point for executing the command.
Step 3: Open the chat window
Open the chat window by pressing the ‘/‘ key. This will allow you to enter commands in the chat.
Step 4: Enter the fill command
Type the fill command in the chat window, following the syntax: //fill <block>. Replace ‘<block>‘ with the type of block you want to use to fill the selected area. For example, if you want to fill the area with stone blocks, the command would be: //fill stone.
Step 5: Specify the area
Specify the area you want to fill by clicking the two opposite corners with the axe. This will define the boundaries of the area where the fill command will be executed.
Step 6: Execute the command
Press the ‘Enter‘ key or click ‘Send’ in the chat window to execute the fill command. The selected area will be filled with the chosen block type.
