When it comes to paintball markers, the Empire Axe is a popular choice for many players. However, if you’ve noticed that your Axe is blowing air out the barrel, you may be wondering what could be causing this issue.
One possible cause for air blowing out the barrel is a problem with the air pressure. It’s important to make sure that your marker is properly aired up and that the pressure is set correctly. If the pressure is too high, it can cause air to escape through the barrel. On the other hand, if the pressure is too low, it may not provide enough force to properly propel the paintballs.
Another possible cause is a damaged or worn-out o-ring. O-rings are rubber seals that help to create a tight seal between the different components of the marker. Over time, these o-rings can become worn or damaged, which can result in air leaking out the barrel. It’s important to regularly inspect and replace worn-out o-rings to ensure the proper functioning of your marker.
Additionally, improper maintenance or cleaning can also lead to air blowing out the barrel. If there is debris or paint buildup in the airway or barrel, it can disrupt the flow of air and cause it to escape through the barrel instead. Regularly cleaning and maintaining your marker can help prevent this issue.
In conclusion, if you notice that your Empire Axe is blowing air out the barrel, it’s important to check the air pressure, inspect and replace any damaged o-rings, and ensure proper maintenance and cleaning. By addressing these potential causes, you can get your marker back to its optimal performance on the paintball field.
Why is my Empire Axe shooting air out the barrel?
If your Empire Axe paintball marker is shooting air out the barrel instead of propelling the paintballs, there could be a few possible reasons for this issue. Understanding the cause can help you diagnose and fix the problem effectively.
1. Bolt or bolt guide issues:
- Check if the bolt is properly aligned and seated in the bolt guide. Misalignment or improper seating can result in air escaping through the barrel.
- Inspect the bolt guide for any damage or wear. A damaged or worn bolt guide can cause air leakage.
2. Regulator problems:
- Examine the regulator for any leaks or damage. A malfunctioning regulator can cause air to escape through the barrel.
- Ensure that the regulator pressure is properly adjusted according to the manufacturer’s recommendations.
3. Valve issues:
- Inspect the valve for any debris or dirt that may be preventing it from closing properly. A faulty valve can lead to air escaping through the barrel.
- Check if the valve spring is in good condition. A weak or damaged valve spring can cause air leakage.
4. O-ring problems:
- Inspect all O-rings in your Empire Axe for any signs of wear, damage, or dryness. Replace any worn or damaged O-rings with new ones.
- Apply a small amount of paintball marker oil or lubricant to the O-rings to keep them properly sealed and functioning.
5. HPA tank issues:
- Inspect the HPA tank for any leaks or damage. A leaking tank can result in air escaping through the barrel.
- Ensure that the tank is properly filled and pressurized according to the manufacturer’s recommendations.
If you have checked all these possible causes and are still experiencing air escaping through the barrel, it may be best to seek assistance from a professional paintball marker technician or contact the Empire Axe customer support for further guidance.
Common Causes of Air Leakage
Air leakage from the barrel of an Empire Axe paintball marker can be caused by a number of factors. Here are some common causes:
1. Damaged O-rings
O-rings are small rubber seals that help create an airtight seal between the different parts of the marker. If these O-rings are worn out or damaged, they may not be able to effectively seal the air inside the marker, resulting in air leakage from the barrel.
2. Loose Air Fittings
The air fittings, such as the ASA (Air Source Adapter) and the regulator, need to be properly tightened to prevent air leakage. If these fittings are loose, they may not create a secure seal, allowing air to escape from the barrel.
3. Improperly Lubricated Bolt System
The bolt system of the Empire Axe marker needs to be properly lubricated to ensure smooth operation and airtight seals. If the bolt system is not adequately lubricated, it may cause air leakage from the barrel.
4. Dirty or Damaged Solenoid Valve
The solenoid valve is responsible for controlling the air flow within the marker. If the solenoid valve is dirty or damaged, it may not be able to function properly, leading to air leakage from the barrel.
5. Incorrect Pressure Settings
If the pressure settings of the marker are not properly adjusted, it can result in air leakage from the barrel. It is important to follow the manufacturer’s guidelines for setting the correct pressure for optimal performance and to prevent air leakage.Regular maintenance and proper care can help minimize air leakage issues in Empire Axe paintball markers. It is recommended to consult the marker’s user manual or seek professional assistance if the problem persists.
Insufficient O-ring Lubrication
One possible reason why your Empire Axe may be blowing air out of the barrel is insufficient O-ring lubrication. O-rings are small rubber seals that help create an airtight seal between different components of the marker, including the bolt and the body. Without proper lubrication, these O-rings can become dry and brittle, leading to air leaks.
To prevent this issue, it is important to regularly lubricate the O-rings using a paintball-specific lubricant. This lubricant helps keep the O-rings pliable and ensures a proper seal. Make sure to follow the manufacturer’s recommendations for lubrication frequency and use a high-quality lubricant that will not degrade the O-rings over time.
In addition to regular lubrication, it is also important to check the O-rings for any signs of damage or wear. Inspect the O-rings carefully, looking for cuts, nicks, or any other visible issues. If you notice any damage, it is crucial to replace the affected O-rings to maintain the performance of your marker.
Proper O-ring maintenance also includes cleaning the O-ring grooves and removing any dirt, debris, or old lubricant that may accumulate. Carefully use a soft cloth or cotton swab to clean the grooves, ensuring that no residue remains. This will help in achieving a better seal and reduce the chances of air leaks.
Summary
Insufficient O-ring lubrication can cause air leaks in your Empire Axe marker, leading to air blowing out of the barrel. To prevent this issue, make sure to regularly lubricate the O-rings using a paintball-specific lubricant. Check the O-rings for any signs of damage and replace them if necessary. Additionally, clean the O-ring grooves to remove any dirt or debris. By properly maintaining the O-rings, you can ensure airtight seals and optimal performance of your marker.
Damage or Worn O-rings
In some cases, the issue of air blowing out of the barrel in an Empire Axe marker could be due to damaged or worn O-rings. O-rings are small rubber seals that create an airtight seal between different parts of the marker.
If O-rings are damaged or worn, they may not create a proper seal, causing air to escape through the barrel. This can result in decreased efficiency and inconsistent performance of the marker.
To check if O-rings are the cause of the issue, inspect each O-ring thoroughly for signs of damage, such as cracks, tears, or excessive wear. Pay particular attention to the O-ring located in the bolt system, as this is a common area for O-ring damage.
If any damaged or worn O-rings are found, they should be promptly replaced with new ones. O-rings are inexpensive and can be easily replaced with basic tools. It is recommended to use the correct size and type of O-rings specified by the manufacturer to ensure proper fit and function.
Regular maintenance and inspection of O-rings is essential to prevent issues like air leakage. It is recommended to clean and lubricate O-rings regularly to ensure their longevity and optimal performance.
Tips for O-ring maintenance:
- Regularly inspect O-rings for signs of damage or wear.
- Clean O-rings with a mild soap solution or approved marker cleanser.
- Apply a small amount of marker-specific lubricant to the O-rings for smooth operation and better sealing.
- Ensure proper storage of the marker in a cool, dry place to prevent O-ring degradation.
Conclusion
Damaged or worn O-rings can be a possible cause of air blowing out of the barrel in an Empire Axe marker. Regular inspection and maintenance of O-rings are essential to prevent issues and ensure optimal performance of the marker.
Internal Regulator Issues
If your Empire Axe paintball marker is blowing air out of the barrel, it is likely due to internal regulator issues. The internal regulator is responsible for controlling the pressure of the air that is released from the tank and into the marker.
Common Causes
There are a few common causes for internal regulator issues on the Empire Axe:
- Regulator maintenance: Lack of regular maintenance and cleaning can cause the internal regulator to malfunction. It is important to clean and lubricate the regulator according to the manufacturer’s recommendations.
- Damaged O-rings: The O-rings inside the regulator may become worn or damaged over time. If the O-rings are not sealing properly, it can cause air to leak out of the barrel.
- Incorrect pressure settings: If the internal regulator is set to an incorrect pressure, it can cause air to be released too quickly, leading to air blowing out of the barrel.
Troubleshooting Steps
If you are experiencing internal regulator issues with your Empire Axe, here are some troubleshooting steps you can try:
- Clean and lubricate the regulator: Follow the manufacturer’s instructions to clean and lubricate the regulator properly. This will help ensure that the internal components are functioning correctly.
- Check the O-rings: Inspect the O-rings inside the regulator for any signs of wear or damage. Replace any damaged O-rings to ensure a proper seal.
- Adjust the pressure settings: Check the user manual for your Empire Axe marker to determine the correct pressure settings for the internal regulator. Make any necessary adjustments to ensure the pressure is set correctly.
If these troubleshooting steps do not resolve the issue, it may be necessary to seek professional assistance. Contact the manufacturer or a certified technician for further diagnosis and repair.
