Have you ever wanted to amaze your friends and family with a cool magic trick? Well, the witches broom string trick is a classic that is sure to leave them spellbound. With just a few simple materials and some practice, you can learn how to make a broom stand upright on its own using only a piece of string.
To start, you’ll need a broom with a long handle and a piece of string about two feet in length. Make sure that the broom handle is smooth and free from any rough edges or splinters that could interfere with the trick.
Step 1: Begin by holding the broom handle firmly in one hand, with the bristles facing downward. Take the piece of string and tie one end securely around the broom handle, about a foot from the top. Make sure the string is tightly knotted so that it won’t slip.
Step 2: Next, hold the broom handle upright, with the bristles touching the ground. Take the free end of the string in your other hand and position it so that it is about six inches away from the broom handle. This will create a triangle shape with the broom handle as the base and the string as the two sides.
Step 3: Now comes the magic part. To make the broom stand on its own, all you have to do is give the string a quick snap. This will create a vibration that travels up the string and causes the broom to balance vertically. It may take a few tries to get the hang of snapping the string just right, so don’t be discouraged if it doesn’t work perfectly the first time.
It’s important to note that this trick works best on a smooth, flat surface, so make sure you have enough space to perform it without any obstructions. With a little practice and a touch of showmanship, you’ll soon be able to perform the witches broom string trick like a pro, leaving your friends and family amazed and wondering how you did it!
Step-by-step guide on how to perform the witches broom string trick
The witches broom string trick is a classic magic trick that involves making a string appear to float in mid-air. By following these step-by-step instructions, you can learn how to perform this impressive illusion and amaze your friends and family.
Materials needed:
- A long piece of string
- A broomstick
- A chair or stand to prop up the broomstick
Now, let’s dive into the steps:
Step 1: Set up the broomstick
Find a chair or stand that can hold the broomstick upright. Place the broomstick securely on the chair or stand so that it stands vertically, with the bristles pointing upward.
Step 2: Attach the string
Take the long piece of string and securely tie one end of it around the middle of the broomstick. Make a tight knot so that the string does not come loose during the trick.
Step 3: Hold the other end of the string
Grab the other end of the string and hold it in your hand. Make sure to keep it taut, but not too tight.
Step 4: Practice your movements
Before performing the trick in front of an audience, practice moving your hand and the string in a smooth and controlled manner. This will help create the illusion that the string is floating on its own.
Step 5: Perform the trick
Now it’s time to perform the witches broom string trick. Stand a few feet away from the broomstick and slowly start moving your hand up and down. As you do this, the string should appear to be floating in mid-air, as if it is being held up by an invisible force.
Remember to maintain a confident and relaxed demeanor as you perform the trick to enhance the illusion. You can even add some additional theatrics, such as reciting a magic incantation or making mystical gestures.
With practice and a bit of showmanship, you can master the witches broom string trick and become a true magician in the eyes of your audience. Enjoy the wonder and amazement you will bring to others with this classic magic illusion!
Gather the necessary materials
Before you can perform the witches broom string trick, you will need to gather the following materials:
- A broomstick
- A spool of string
- A pair of scissors
- A small weight, such as a key or a washer
Make sure the broomstick is clean and free from any dust or debris. The string should be long enough to wrap around the broomstick several times. The weight is necessary to create tension on the string, so choose something small but heavy enough to hold the string in place.
Once you have gathered all the materials, you will be ready to proceed with the next steps of the witches broom string trick.
Tie two strings together
Step 1: Take the short string and make a loop by bending it in half. The loop should be big enough for the broomstick to fit through.
Step 2: Hold the loop of the short string in one hand and the long string in the other hand. Bring the loop of the short string over and around the long string.
Step 3: Take the end of the short string that is sticking out and bring it through the loop. Pull the short string tight to create a knot around the long string.
Step 4: Repeat steps 1-3 two more times to create two more knots. Make sure the knots are spaced evenly along the long string and are pulled tight.
Note: Make sure the knots are tied tightly so they don’t come undone during the trick.
Once you have tied the two strings together, you are ready to move on to the next step of the witches broom string trick.
Create a loop with the strings
To create the loop for the witches broom string trick, you will need three pieces of string that are approximately the same length. Start by holding one end of each string together and tying a knot at the top. This will create a small loop where the three strings are connected.
Next, separate the three strings so that they are spread out evenly. Hold onto the knot at the top to keep everything together. Now, take each string and individually wrap it around the broom handle. Start at the top near the knot and work your way down towards the bristles.
As you wrap each string around the broom handle, make sure to keep it tight and secure. You want the strings to be securely fastened to the broom handle so that they don’t come loose during the trick.
Once you have wrapped all three strings around the broom handle, bring them back up towards the top and tie another knot. This will secure the strings in place and prevent them from unraveling.
Now, with the looped end of the strings at the top and the knotted end at the bottom, you are ready to perform the witches broom string trick. Hold onto the looped end and gently pull the broom handle upwards. As you do this, the strings will magically slide down the broom handle and appear to be floating in mid-air. It’s a simple yet impressive trick that is sure to amaze your friends and family!
Cross the strings to form the broom handle
To create the broom handle, take the longer piece of string and hold it horizontally in front of you. Then, take the shorter piece of string and cross it over the longer piece, creating an “X” shape. Make sure the crossed section is located about two-thirds of the way towards one end of the longer string.
Once the strings are crossed, hold onto the crossed section firmly with one hand. With your other hand, take the end of the shorter string and wrap it around the back of the longer string, passing it under the crossed section. Tuck the end of the shorter string through the loop created by this motion, forming a knot.
Pull the knot tight, making sure it is secure. This will hold the crossed section of the strings in place, creating the broom handle. The longer portion of the string will extend from the knot, resembling the handle of a broom.
Ensure that the string is tightly secured and there is no slack in the handle. Adjust the knot if needed. Now, you have successfully formed the broom handle using the crossed strings.
Perform the trick with the broom string
Once you have prepared the string with the invisible thread attached, it’s time to perform the witches broom string trick. Here is a step-by-step guide:
|
Step 1: |
Hold the broomstick firmly with one hand, making sure it is steady and stable. |
|
Step 2: |
Gently toss the string into the air, while making it look like you are tossing it towards the broomstick. |
|
Step 3: |
As the string is in mid-air, magically attach it to the broomstick by using the invisible thread. |
|
Step 4: |
Gently pull the broomstick towards you, creating the illusion that the broomstick is levitating or being attracted to the string. |
|
Step 5: |
Keep performing the trick for a few moments, allowing the audience to be amazed by the levitating broomstick. |
|
Step 6: |
When you are ready to reveal the trick, simply let go of the string and catch the broomstick with the other hand. |
Remember, the key to performing this trick successfully is to maintain a confident and smooth performance. Practice beforehand to ensure you can seamlessly execute each step, creating an impressive illusion for your audience.
