Halloween is just around the corner, and what better way to get into the spooky spirit than by making your very own witches broom! Creating a paper broom is not only a fun and easy craft, but it also makes a great decoration for any Halloween party or haunted house.
To make a paper witches broom, all you need is a few simple supplies that you probably already have lying around the house. Grab some brown construction paper or cardboard, a pair of scissors, a ruler, and a pencil. You can also add some extra flair to your broom by using colored paper or adding decorative elements like ribbons or glitter.
Start by cutting a long strip from the brown construction paper or cardboard. This will be the handle of your broom. The length of the strip will depend on how big you want your broom to be, so feel free to adjust accordingly. Once you have your strip, fold it in half lengthwise and create a crease to give it some rigidity.
Next, take a pair of scissors and cut small slits along the folded edge of the strip. These slits should be about an inch apart and should go about halfway through the strip. Be careful not to cut all the way through. This will create the bristles of your broom.
Once you have cut the slits, use your fingers to gently separate the strands of paper and fluff them up to give your broom a more realistic look. You can also use a comb or brush to help achieve this effect. If you want, you can even trim the ends of the bristles to make them look neater or more uneven, depending on the style you prefer.
Steps to Make a Witches Broom with Paper
- Gather your materials: a sheet of paper, scissors, and a pencil.
- Start by folding the paper in half horizontally.
- Next, fold it in half vertically to create a smaller square.
- Fold the square diagonally, in both directions, to create an “X” shape.
- Unfold the paper and cut along the folded lines towards the center, stopping about an inch away.
- Roll the cut edges of the paper towards the center to create a tight cone shape.
- Secure the rolled paper with tape or glue.
- To create the broom bristles, cut slits down the bottom of the cone, about an inch apart.
- Unfold the cut strips and shape them to look like broom bristles.
- Your witch’s broom made with paper is now ready to use or display!
Now you can enjoy a fun and festive decoration with this simple paper craft. It’s a great activity for kids or for Halloween parties. Have fun making your own witches broom!
Gather the necessary materials
To make a witches broom with paper, you will need the following materials:
- Construction paper: Choose a color that resembles a broom handle, such as brown or tan.
- Scissors: Make sure they are sharp enough to cut through the paper.
- Glue: Use glue sticks or craft glue to secure the paper together.
- Twine or string: This will be used for the broom bristles.
- Optional decorations: If you want to add some extra flair to your broom, gather decorative items like ribbon, glitter, or stickers.
Once you have all these materials on hand, you’ll be ready to start crafting your very own witches broom with paper!
Create the broomstick
To create the broomstick for your witches broom, you will need a few simple materials:
| Materials: | Paper towel roll or a thin wooden dowel |
| Scissors | |
| Tape | |
| Paint or markers (optional) |
If you have a paper towel roll, use it as is for your broomstick. If you prefer a sturdier broomstick, you can also use a thin wooden dowel. Simply trim the dowel to your desired length using scissors.
If you’d like to add some color to your broomstick, you can paint it or use markers to personalize it. This step is optional, but it can add a fun touch to your witches broom.
Once you have your broomstick ready, you can move on to the next step of creating the bristles for your witches broom.
Prepare the broom bristles
To create the bristles of the witch’s broom, you will need several strips of brown paper. Start by cutting the paper into thin strips, approximately 1 inch wide and about 10 inches long. You will need enough strips to cover the entire broomstick and create a full and realistic-looking bristle effect.
Take each strip of paper and using a pair of scissors, make small cuts along one side of the strip, about 1/4 inch apart. These cuts should go about halfway through the paper strip, creating a fringed appearance. Be careful not to cut all the way through the paper.
Repeat this process for all the strips of paper. Once you have all the strips cut, take one strip and hold it vertically against the broomstick, starting from the top. Wrap the strip tightly around the broomstick, making sure to cover the entire surface. Use glue or tape to secure the end of the strip.
Creating the layered effect
To achieve a layered effect for the bristles, take another strip of paper and repeat the wrapping process slightly below the first strip. Continue adding more strips in a similar manner, each one slightly lower than the previous one, until you reach the bottom of the broomstick.
Make sure to overlap the strips slightly as you go, so that the broomstick is fully covered and the layers of bristles appear realistic. Trim any excess paper at the bottom to ensure a neat finish.
Note: You can vary the length and thickness of the strips to add texture and depth to your broom bristles. Experiment with different sizes to achieve the desired effect.
Finishing touches
Once you have wrapped all the strips around the broomstick, give it a gentle shake to fluff up the bristles and create a fuller appearance. If any of the strips seem loose, use a small amount of glue or tape to secure them in place.
Your witch’s broom is now complete! The addition of the bristles brings it to life and gives it an authentic look. You can now use your broom as a decoration for Halloween parties or as a prop for costumes. Enjoy the bewitching atmosphere it adds to your festivities!
Attach the bristles to the broomstick
Now that your bristles are ready, it’s time to attach them to the broomstick. Remember to have your broomstick, bristles, and a strong adhesive ready.
- Apply a generous amount of adhesive to one end of the broomstick.
- Hold the bristles firmly together and place them onto the adhesive, ensuring they are aligned with the broomstick.
- Press down on the bristles and hold them in place for a few seconds to allow the adhesive to set.
- Once the adhesive has dried, give the bristles a gentle tug to ensure they are securely attached to the broomstick.
- Repeat this process at the opposite end of the broomstick to attach the remaining bristles.
Make sure to let the adhesive dry completely before using your witch’s broom. This will ensure that the bristles stay firmly in place while you use it. Now, your witch’s broom is ready to be showcased or used for Halloween decorations!
Add decorative touches
Once you have completed the basic structure of your paper broom, it’s time to add some decorative touches to give it a magical and whimsical look.
1. Paint the handle
Using acrylic or craft paint, choose a color that matches your desired broom aesthetic and paint the handle of the broom. You can also add some texture by using a sponge or a dry brush technique. Allow the paint to dry completely before moving on to the next step.
2. Attach ribbon or twine
To add a decorative touch to the handle, you can attach ribbon or twine. Wrap it around the handle, starting from the top and working your way down. You can secure it with a dab of hot glue or use a bow to tie it in place.
Note: If you want to achieve a rustic or natural look, you can use jute twine or raffia instead of ribbon.
3. Embellish with charms or beads
Add some magical flair to your broom by attaching charms or beads. You can find small charms at craft stores or repurpose old jewelry for this purpose. Use a thin wire or thread to attach them to the handle or the bristles of the broom.
Tip: Choose charms or beads that have a mystical or witchy theme, such as moons, stars, or pentagrams.
With these decorative touches, your paper broom is now ready to be displayed or used as a Halloween decoration in your home!
