If you are a scooter enthusiast, you know how important it is to have a reliable and high-performance fork for your ride. The Ethic Legion fork is a popular choice among many riders, but if you prefer the SCS compression system, you might be wondering if it is possible to convert this fork. The answer is yes, and in this article, we will guide you through the process of converting the Ethic Legion fork to SCS.
Firstly, it is important to understand the difference between the SCS and HIC compression systems. SCS, which stands for Standard Compression System, is known for its simplicity and compatibility with most scooter forks. On the other hand, the Ethic Legion fork comes with built-in HIC compression, which requires a different set of components.
To convert the Ethic Legion fork to SCS, you will need a few tools and parts. These include an SCS clamp, an SCS shim, a compression bolt, and an Allen wrench. It is crucial to ensure that all the parts you choose are compatible with your scooter and the Ethic Legion fork in particular.
Once you have gathered all the necessary components, you can begin the conversion process. Start by removing the existing HIC compression system from the Ethic Legion fork. This typically involves unscrewing the compression bolt and removing the shim and headset dust cover. Set aside these components as you will no longer need them.
Next, insert the SCS shim into the fork’s steerer tube. The shim acts as an adapter, allowing the SCS clamp to fit securely onto the fork. Once the shim is in place, slide the SCS clamp over the fork and align it with the shim. Use the Allen wrench to tighten the clamp securely onto the fork. It is important to ensure that the clamp is aligned properly for optimal performance.
Finally, insert the compression bolt into the SCS clamp and tighten it using the Allen wrench. This bolt helps secure the SCS clamp onto the fork, ensuring a stable and reliable compression system. Once you have tightened the bolt, double-check all the connections and make any necessary adjustments.
By following these steps, you can successfully convert the Ethic Legion fork to SCS and enjoy the benefits of this popular compression system. Remember to always prioritize safety and consult a professional if you are unsure about any part of the conversion process. Now you can confidently hit the streets with your upgraded scooter and experience the smoothness and stability that SCS offers.
Step-by-Step Guide for Converting the Ethic Legion Fork to SCS
Introduction
If you are looking to convert your Ethic Legion Fork to SCS (Standard Compression System), then you have come to the right place. This step-by-step guide will walk you through the process and ensure a smooth conversion. SCS is a popular compression system used by many scooter riders for its durability and enhanced performance.
Step 1: Gather the necessary tools
Before you start the conversion process, make sure you have the following tools ready:
- 5mm Allen key
- 15mm wrench
- SCS compression kit (including SCS clamp and compression bolt)
Step 2: Remove the existing fork and headset
Using the 5mm Allen key, remove the bolts that secure the fork to the scooter deck. Once the bolts are removed, gently slide out the existing fork. Next, use the 15mm wrench to remove the headset from the scooter deck. Set both aside for now.
Step 3: Prepare the SCS clamp
Take the SCS clamp from the compression kit and place it around the top of the fork. Make sure the clamp is centered and aligned properly. Tighten the clamp using the 5mm Allen key until it is securely in place.
Step 4: Install the compression bolt
Take the compression bolt from the compression kit and insert it into the top of the SCS clamp. Use the 5mm Allen key to tighten the bolt until it is firmly in place. This bolt will provide the necessary compression to hold the fork securely.
Step 5: Attach the fork to the scooter deck
Slide the fork back into the scooter deck, aligning it with the headset. Use the 5mm Allen key to secure the fork to the deck by tightening the bolts. Make sure the fork is centered and straight before fully tightening the bolts.
Step 6: Check and adjust
Once the fork is securely attached, double-check all the bolts and connections to ensure everything is tightened properly. Give the scooter a few test runs to make sure the fork is functioning smoothly and there are no issues or loose parts.
Conclusion
By following these step-by-step instructions, you can successfully convert your Ethic Legion Fork to SCS. Remember to take your time and double-check each step for a safe and efficient conversion. Get ready to experience the enhanced performance and stability that SCS compression system brings to your scooter!
Gather the Necessary Tools and Materials
Before you begin converting the ethic legion fork to scs, it’s important to gather all the necessary tools and materials. Having everything ready beforehand will make the conversion process much smoother and more efficient.
Tools:
- Socket set
- Wrench set
- Allen wrench set
- Screwdriver set
- Pliers
- Hammer
- Measuring tape
- Hacksaw
Materials:
- New SCS compression system
- SCS clamp
- Headset
- Griptape
- Bar ends
Make sure to have all the necessary tools in good working condition before starting the conversion. Having the appropriate materials will ensure a successful and seamless transition from an ethic legion fork to scs.
Remove the Old Fork and Headset
Before installing the SCS (Standard Compression System) on your Ethic Legion scooter, it is essential to remove the old fork and headset. Follow these step-by-step instructions to complete this process:
Step 1: Begin by turning your scooter upside down or securely clamping it to a workbench. This will provide stability and make it easier to access the components.
Step 2: Using an Allen wrench or socket wrench, loosen the bolts that hold the old fork in place. There will typically be two bolts located on the front of the scooter deck. Remove these bolts, being careful not to misplace them.
Step 3: Gently pull the old fork out of the scooter deck. Wiggle it if necessary to loosen it from the headset. Keep in mind that some forks may be tightly fitted, so a bit of force may be required to remove it.
Step 4: Once the old fork is removed, you can detach the headset. This may require removing additional bolts or screws, depending on the type of headset your scooter has. Refer to the manufacturer’s instructions for specific details.
Step 5: Once you have removed the old fork and headset, take a moment to inspect them for any signs of damage or wear. If necessary, clean or replace these components before proceeding with the SCS installation.
Step 6: Finally, dispose of the old fork and headset responsibly. Consider recycling or donating them if they are still in good condition.
By following these steps, you will have successfully removed the old fork and headset from your Ethic Legion scooter, making way for the installation of the SCS. With the old components removed, you can now proceed with the next steps in converting your scooter to SCS.
Install the SCS Compression System
To convert the ethic legion fork to SCS, you will need to install the SCS compression system. Here is a step-by-step guide on how to do it:
- Start by removing the existing headset cap and clamp from your fork.
- Next, remove the front wheel from your scooter to access the fork and compression system area.
- Take the SCS compression system and place it on top of the fork tube.
- Align the compression system with the four bolt holes on the fork tube.
- Insert the bolts through the holes and tighten them securely with an Allen wrench.
- Make sure the compression system is centered and properly aligned with the fork tube.
- Replace the headset cap on top of the compression system.
- Tighten the headset cap using a standard wrench or a headset cap tool.
- Reattach the front wheel to your scooter.
- Double-check all the bolts and connections to ensure everything is tightened and secure.
- Your ethic legion fork has now been successfully converted to SCS!
Installing the SCS compression system provides a secure and efficient way to keep your fork and handlebars in place, allowing for smoother and more controlled rides. Enjoy your new setup!
Attach the Fork to the Deck
Once you have converted the ethic legion fork to SCS, it is time to attach it to the deck of your scooter. This step is crucial for ensuring the stability and performance of your scooter, so make sure to follow the instructions carefully.
First, you will need to remove the existing headset from your scooter deck. Use a socket wrench to loosen the headset bolts and carefully take it off. Set it aside for future use or replacement if needed.
Next, take the converted ethic legion fork and align it with the head tube of the deck. Make sure that the fork is facing forward and the compression system is properly installed.
Place the fork into the head tube of the deck and align it with the top of the deck. The fork should fit snugly into the head tube without any gaps.
Once the fork is in place, insert the headset bearings into the head tube. Make sure they are positioned correctly and evenly spaced around the fork. You can use a bearing press tool or your hands to insert them securely.
Tighten the headset compression ring onto the fork. Use a wrench to tighten it firmly, but be careful not to overtighten as it may damage the bearings.
Finally, reattach the headset cap onto the fork. Make sure it is securely tightened and aligned with the top of the fork.
Once the fork is properly attached to the deck, double-check all the bolts and screws to ensure they are tight and secure. Test the scooter to make sure the fork is properly aligned and functioning correctly.
Now your ethic legion fork has been successfully converted to SCS and attached to the deck of your scooter. You are ready to enjoy a smoother and more stable ride!
Adjust and Test the Scooter
Once you have converted your Ethic Legion fork to SCS, it is important to adjust and test the scooter to ensure its performance and safety. Here are the steps to follow:
1. Check and tighten all bolts:
Go through all the bolts on your scooter, including the compression bolt, headset bolts, and wheel bolts. Make sure they are tightened properly to avoid any looseness or wobbling. Use a torque wrench if needed.
2. Adjust the headset:
Loosen the headset cap and adjust the headset bearings to make sure they are not too tight or too loose. The headset should allow for smooth rotation without any excess play. Tighten the headset cap once you achieve the desired adjustment.
3. Test the compression system:
With the SCS installed, test the compression system by pushing down on the handlebars and checking for any unusual movement or noise. The compression should be smooth and stable. If there are any issues, adjust the compression bolt accordingly.
4. Check the wheel alignment:
Ensure that the wheels are aligned properly. Spin each wheel to check if it rotates smoothly without any wobbling. Also, check the distance between the wheels and the brake for consistent alignment. Adjust as necessary.
5. Test the scooter:
Take the scooter for a test ride in a controlled environment, such as an empty parking lot or skate park. Pay attention to the scooter’s handling, braking, and overall stability. If there are any issues, go back and check the previous steps to make necessary adjustments.
By following these steps, you can properly adjust and test your converted Ethic Legion fork to SCS scooter, ensuring its optimal performance and safety.
