Norton Fork Gaiters are an essential accessory for protecting your motorcycle forks from dirt, dust, and debris. These gaiters not only add a touch of retro style to your bike, but also help prolong the life of your forks by preventing damage caused by the elements. Fitting Norton Fork Gaiters is a simple and straightforward process that can be done at home with just a few tools.
Step 1: Clean the forks thoroughly to ensure that there is no dirt or debris on the surface. This will help the gaiters to fit properly and provide maximum protection. Use a mild soap and water solution or a specialized cleaner to clean the forks.
Step 2: Measure the length of your fork tubes to determine the correct size of gaiters to use. Gaiters come in different sizes, so it’s important to choose the right size for your bike. Measure the diameter as well, as this will determine how the gaiter will fit over the fork.
Step 3: Slide the gaiters over the fork tubes, starting from the top. Make sure that the gaiters are fitted snugly and evenly, with no wrinkles or bunching. If necessary, use a rubber mallet to gently tap the gaiters into place.
Step 4: Secure the gaiters in place using the provided zip ties or clamps. Make sure that the gaiters are securely fastened and will not slip or slide during riding. Trim any excess zip ties for a tidy finish.
Step 5: Once the gaiters are securely fastened, give them a final check to ensure that they are fitted properly and evenly. Adjust if necessary.
With Norton Fork Gaiters fitted, your motorcycle will not only look great, but also be protected from the elements. Regularly check the gaiters for any signs of wear or damage, and replace them if necessary to maintain optimal protection for your forks. Enjoy the ride!
Fitting Norton Fork Gaiters: Step-by-Step Guide
If you own a Norton motorcycle and want to protect the fork tubes from dust, dirt, and debris, fitting fork gaiters is a great solution. Not only do they provide added protection, but they also give your bike a vintage look. Here is a step-by-step guide on how to fit Norton fork gaiters:
Tools and Materials Needed:
- Fork gaiters (compatible with your Norton model)
- Socket set
- Allen wrenches
- Flathead screwdriver
- Grease
- Rubber mallet
Step 1: Remove the Front Wheel
Start by elevating your Norton motorcycle using a center stand or a sturdy jack. Loosen the front axle nut with a socket set and remove it. Gently lower the front wheel and slide it out of the fork tubes. Set the wheel aside in a safe place.
Step 2: Remove the Fork Braces
Using an appropriate-sized socket or Allen wrench, remove the bolts securing the fork braces. These braces are typically located on the sides of the fork tubes, and their removal will allow you to access the top of the fork tubes.
Step 3: Lubricate the Fork Tubes
Apply a thin layer of grease to the exposed fork tubes. This will help the gaiters slide on smoothly and provide additional lubrication.
Step 4: Stretch the Fork Gaiters
Before installation, stretch the fork gaiters by pulling on the open ends. This will make it easier to slide them over the fork tubes.
Step 5: Slide the Gaiters onto the Fork Tubes
Starting from the top, carefully slide each gaiter over the fork tube, ensuring that it is in the correct position. Use a rubber mallet to lightly tap the gaiters into place if necessary.
Step 6: Secure the Gaiters
Once the gaiters are properly positioned over the fork tubes, secure them in place by reinstalling the fork braces. Use the appropriate bolts and tighten them securely with a socket or Allen wrench.
Step 7: Reinstall the Front Wheel
Lift the front wheel back into position and insert the axle through the fork tubes. Tighten the front axle nut using a socket set. Finally, check the wheel alignment and adjust if necessary.
And there you have it! You have successfully fitted Norton fork gaiters to your motorcycle. Not only will they provide extra protection for your fork tubes, but they will also give your Norton a classic and stylish look.
Preparation for Installation
Before beginning the installation process, it is important to gather all the necessary tools and materials. Here are the steps to help you prepare for fitting Norton fork gaiters:
- Make sure you have the correct size of Norton fork gaiters for your motorcycle model. It is essential to check the compatibility and measurements before purchasing.
- Inspect the condition of your forks and clean them thoroughly. Remove any dirt, debris, or old gaiters that may be present. This will ensure a proper fit and prevent any damage to the new gaiters.
- Gather the required tools, such as screwdrivers, spanners, or socket sets, depending on the type of fasteners used on your fork assembly. Having the right tools readily available will make the installation process much easier.
- Prepare a clean and organized workspace. Find a flat surface where you can comfortably work on your motorcycle. It is advisable to have a clean cloth or mat to place the components and protect them from scratches or damage.
- Read the manufacturer’s instructions thoroughly. Familiarize yourself with the installation steps and any specific guidelines provided by the gaiter manufacturer. This will help you avoid any mistakes or potential issues during the installation process.
By following these preparation steps, you will ensure a smooth and successful installation of Norton fork gaiters. Take your time to gather everything you need, inspect your forks, and understand the instructions thoroughly before starting the fitting process.
Removing Old Fork Gaiters
When fitting new fork gaiters to your Norton motorcycle, it is important to first remove the old ones. Follow these steps to properly remove the old fork gaiters:
1. Start by loosening the front wheel axle nut and removing the front wheel. This will provide easier access to the fork gaiters.
2. Once the front wheel is removed, locate the bottom of the fork gaiters where they are attached to the fork sliders. You will likely find a clamp or zip tie securing them in place. Use pliers or a screwdriver to remove these attachments.
3. Next, carefully slide the gaiters upward to expose the top of the fork tubes. You may need to use a bit of force to slide the gaiters off, as they may be stuck due to age or dirt accumulation.
4. With the gaiters removed, inspect the fork tubes for any signs of damage or corrosion. If necessary, clean the fork tubes thoroughly before fitting the new gaiters.
5. It is recommended to replace the old fork gaiters with new ones to ensure proper protection and maintenance of your forks. Refer to the manufacturer’s instructions or a service manual for your specific Norton model to properly fit the new gaiters.
By following these steps, you can remove the old fork gaiters from your Norton motorcycle and prepare for fitting the new ones.
Installing New Norton Fork Gaiters
If you own a Norton motorcycle and are looking to protect your fork tubes from dirt, dust, and debris, installing new fork gaiters is a great option. Fork gaiters are flexible rubber covers that wrap around the exposed part of your motorcycle’s fork tubes.
Step 1: Gather the necessary tools and materials
Before you begin the installation process, make sure you have all the required tools. You will need a socket wrench, a set of socket sizes that fits your bike’s fork bolts, a screwdriver, and new fork gaiters specifically designed for your Norton motorcycle.
Step 2: Remove the existing gaiters
Use the socket wrench to remove the bolts holding the existing fork gaiters in place. Carefully slide off the old gaiters from the top and bottom of the fork tubes. Clean any dirt or debris from the fork tubes to ensure a smooth installation of the new gaiters.
Step 3: Install the new fork gaiters
Take the new fork gaiters and stretch them over the top and bottom of the fork tubes. Make sure they are positioned evenly and cover the exposed part of the fork tubes entirely. Use a screwdriver to secure the new gaiters in place by tightening the bolts.
Note: Be careful not to overtighten the bolts as it may damage the gaiters or the fork tubes.
Step 4: Test the fork movement
Once the new gaiters are securely in place, carefully compress and extend the front fork of your Norton motorcycle a few times to ensure the gaiters do not restrict the fork’s movement. Check for any leaks or abnormalities in the fork’s function.
Congratulations! You have successfully installed new fork gaiters on your Norton motorcycle. Enjoy the added protection and enhanced aesthetics of your bike!
