If you’re a skateboarder or a scooter enthusiast, you know the importance of having a secure and stable setup. One crucial component in achieving this is ensuring that your bars are securely fitted onto your fork. For those with threaded forks, fitting an SCS (Standard Compression System) bar can seem challenging at first. However, with the right tools and steps, you can easily fit SCS bars on threaded forks and enjoy a worry-free ride.
Step 1: Gather the necessary tools
Before you begin, make sure you have the following tools handy: an SCS bar, an SCS compression clamp, an Allen wrench, and a hammer. Having these tools ready will help you complete the process smoothly and efficiently.
Step 2: Remove the old bar
If you already have a bar installed on your threaded fork, you’ll need to remove it before fitting the SCS bar. Start by loosening the bolts on the previous compression system using the Allen wrench. Once the bolts are sufficiently loose, you can remove the old bar and set it aside.
Step 3: Prep the SCS bar
Before fitting the SCS bar, you’ll need to prepare it for installation. Start by removing any packaging or protective coverings. Next, insert the SCS compression clamp onto the SCS bar. Ensure that the clamp is positioned correctly and securely around the bar.
By following these three steps, you can successfully fit SCS bars on threaded forks. Remember to always double-check that everything is properly secured and tightened before taking your scooter or skateboard out for a ride. With a properly fitted SCS bar, you’ll experience improved stability and performance that will enhance your riding experience.
Step-by-Step Guide: Fitting SCS Bars on Threaded Forks
Upgrading your scooter’s handlebars to SCS (Standard Compression System) bars can greatly improve your riding experience. In this step-by-step guide, we will walk you through the process of fitting SCS bars on threaded forks.
Step 1: Gather the necessary tools and materials. You will need a set of SCS bars, an SCS clamp, a threaded fork, a compression bolt, Allen keys, and a wrench.
Step 2: Start by removing your old handlebars and grips. Use an Allen key to loosen the clamp bolts and slide them off the fork.
Step 3: Remove the compression bolt from the threaded fork. Use the Allen key to loosen it and slide it out.
Step 4: Take the SCS clamp and place it onto the threaded fork. Make sure it is centered and aligned properly.
Step 5: Insert the compression bolt into the SCS clamp, making sure it goes through the center hole.
Step 6: Tighten the compression bolt using an Allen key. Be careful not to over-tighten it, as it could damage the fork or the clamp.
Step 7: Place the SCS bars onto the compression bolt, aligning them with the fork. Make sure they are straight and secure.
Step 8: Use a wrench to tighten the compression bolt further, ensuring that the bars are held tightly in place.
Step 9: Double-check all the bolts and screws to make sure everything is secure. Give the handlebars a gentle tug to ensure they are properly fitted.
Step 10: Put on your grips and give the new SCS bars a test ride. Enjoy the improved stability and control they provide!
By following this step-by-step guide, you can easily fit SCS bars on threaded forks and elevate your scooter’s performance. Always remember to use proper safety gear and consult a professional if you are unsure about any step of the process.
Preparing for the Installation
Before you start fitting SCS bars on threaded forks, it’s important to make sure you have all the necessary tools and equipment. Here are some steps to help you prepare for the installation process:
1. Gather the required tools:
Make sure you have the following tools handy before you begin:
- SCS bars
- Threadless fork
- Compression system
- Allen key set
- Socket wrench
- Grease
- Helmet
2. Prepare a clean workspace:
Find a stable and well-lit area where you can work comfortably. Clear away any clutter or obstructions that may hinder your progress. Having a clean workspace will make it easier to organize your tools and keep track of small parts during the installation process.
3. Take safety precautions:
Prioritize safety by wearing a helmet and any other protective gear that may be necessary. Keep in mind that accidents can happen, especially when working with tools. Taking proper safety precautions will help minimize the risk of injury.
4. Familiarize yourself with the installation process:
Read the manufacturer’s instructions and familiarize yourself with the steps involved in fitting SCS bars on threaded forks. Ensure you have a good understanding of how each component fits together to avoid any mistakes during the installation process.
5. Apply grease when necessary:
To ensure smooth and effective installation, apply a thin layer of grease to any areas where metal components come into contact with each other. This will help prevent any unwanted friction and make tightening or loosening bolts easier.
By properly preparing for the installation and following the manufacturer’s guidelines, you can ensure a successful and safe fitting of SCS bars on threaded forks.
Removing the Existing Fork System
Before you can begin fitting SCS bars on threaded forks, you’ll need to remove the existing fork system. Here’s a step-by-step guide to help you through the process:
- Start by safely securing your scooter. You can do this by propping it up against a wall or using a scooter stand. This will prevent any accidental movement during the removal process.
- Use a wrench or an adjustable spanner to loosen the top headset cap. This cap is located at the top of the fork and is usually held in place by a bolt or a star nut.
- Once the headset cap is loose, remove it completely from the fork. Set it aside in a safe place so you don’t misplace it.
- Next, loosen the top bolt on the stem. This bolt is typically located at the front of the scooter’s handlebars. Loosening this bolt will allow you to remove the handlebars from the fork.
- Once the top bolt is loose, carefully slide the handlebars out of the fork’s steerer tube. This tube is the part of the fork that extends through the headtube of the scooter’s deck.
- With the handlebars removed, you can now remove the fork from the scooter completely. This may require loosening or removing additional bolts or nuts, depending on your scooter’s specific setup.
- Once the fork is free, inspect it for any signs of damage or wear. This is a good time to replace your fork if it’s in poor condition.
By following these steps, you’ll be able to successfully remove the existing fork system from your scooter in preparation for fitting SCS bars on threaded forks. Remember to take your time and exercise caution during the removal process to avoid any accidents or injuries.
Installing SCS Bars on Threaded Forks
Fitting SCS bars on threaded forks can be challenging, but with the right tools and technique, it is possible. SCS stands for Standard Compression System, which is a popular choice for scooter riders who prefer a solid and secure setup.
Before you begin, ensure that you have the necessary tools and materials, including an SCS clamp, a scooter bar, a threaded fork, a compression bolt, and a socket wrench.
Here is a step-by-step guide to help you install SCS bars on threaded forks:
- Start by removing the existing bar and clamp from your scooter. You can do this by loosening the clamp bolts and sliding the old bar out.
- Next, take your new SCS clamp and place it on the top of the threaded fork. Make sure the clamp is centered and aligned with the fork.
- Insert the compression bolt through the top of the SCS clamp and tighten it using a socket wrench. This will secure the clamp onto the fork.
- Now, attach your scooter bar to the SCS clamp. Slide the bar into the clamp until it sits snugly.
- Once the bar is in place, tighten the clamp bolts using a socket wrench. Make sure the bolts are tightened evenly to ensure a secure fit.
- Finally, double-check all the connections and bolts to ensure everything is secure. Give your scooter a test run and make any necessary adjustments.
It is important to note that SCS bars are designed for threadless forks, so fitting them onto threaded forks may require some modifications or additional parts. If you encounter any issues or are uncertain about the process, it is recommended to consult with a professional scooter technician for assistance.
By following these steps and taking the necessary precautions, you can successfully install SCS bars on threaded forks and enjoy a solid and secure scooter setup.
