The RAM Fork Stem Mount is a popular mounting solution for motorcycles, bicycles, and other vehicles. It allows you to attach various devices, such as GPS units, smartphones, and cameras, to your vehicle securely and conveniently.
To install the RAM Fork Stem Mount, you will need a few tools: a fork stem base, a socket wrench, and an adjustable wrench. Before you begin, make sure to read the instructions provided with your mount kit.
Start by removing the existing cap or cover from the fork stem. Use the adjustable wrench to loosen and remove any bolts or screws holding the cap in place. Once the cap is removed, you will see the fork stem opening.
Next, insert the RAM fork stem base into the fork stem opening. Make sure it fits securely and aligns properly with the stem opening. Use the socket wrench to tighten the base securely in place. Double-check that it is firmly tightened before proceeding.
Once the fork stem base is installed, you can attach the RAM mount holder or cradle for your device. The RAM mount holder is adjustable and can accommodate various devices. Follow the instructions provided with your mount kit to attach the holder securely to the base.
After attaching the holder, insert your device into the mount and adjust it to your preferred position. Make sure it is secure and tightly held in place. Test the stability by gently shaking the mount and device.
Now that your RAM Fork Stem Mount is installed, you can enjoy the convenience of having your device easily accessible while riding. Whether you need navigation assistance or want to capture videos and photos, the RAM Fork Stem Mount provides a stable and reliable solution.
Note: Always follow the manufacturer’s instructions for your specific mount kit and device. Ensure that the mount is securely installed and regularly check its stability to prevent accidents or damage.
Disclaimer: This article is for informational purposes only. Always prioritize safety and follow local laws and regulations while operating any vehicle.
Step-by-Step Guide: Installing Ram Fork Stem Mount
Step 1: Gather all the necessary tools and materials. You will need a ram fork stem mount kit, a wrench, a screwdriver, and your motorcycle.
Step 2: Locate your motorcycle’s fork stem. This is the cylindrical piece that connects your motorcycle’s frame to the front suspension.
Step 3: Ensure that your ram fork stem mount kit comes with the appropriate size adapter for your motorcycle’s fork stem. The adapter should be included in the kit, and you can refer to the instructions to identify the correct size.
Step 4: Remove the top cap from your motorcycle’s fork stem using a wrench. This cap covers the stem and may have a logo or branding on it. Use your wrench to loosen and remove the cap.
Step 5: Insert the adapter from your ram fork stem mount kit into the fork stem. Ensure that it fits snugly and securely.
Step 6: Use a screwdriver to tighten the set screw on the adapter. This will hold the adapter securely in place within the fork stem.
Step 7: Attach the ram mount to the adapter using the provided screws. Use a screwdriver to tighten the screws until the mount is secure and does not move when pulled or pushed.
Step 8: Double-check all connections and ensure that everything is tightened properly. Make sure that the ram mount is securely attached to your motorcycle’s fork stem.
Additional Tips and Considerations
It’s important to follow the specific instructions provided with your ram fork stem mount kit, as installation steps can vary depending on the brand and model. Always consult the manufacturer’s guide for any additional steps or considerations.
It’s recommended to test the stability and security of the ram mount before riding your motorcycle. Ensure that the mount does not move or shift when subjected to various forces, such as vibration or wind.
Regularly check the mount and its connections to ensure that everything is tightened properly. Loose or damaged connections can compromise the stability of the mount and pose a safety risk.
Remember to adjust the ram mount to your desired position and angle before tightening the screws. This will help ensure that your device or accessory is positioned correctly for comfortable and convenient use.
By following these step-by-step instructions, you should be able to easily install a ram fork stem mount on your motorcycle. Enjoy the convenience and versatility that the mount provides for holding your devices or accessories while riding!
Gather the Required Tools
Before you start installing a RAM fork stem mount, you will need to gather the necessary tools. Having the right tools on hand will make the installation process much easier and more efficient.
Here is a list of the tools you will need:
- RAM fork stem mount kit
- Socket wrench set
- Allen wrench set
- Torque wrench
- Screwdriver set
- Threadlocker
- Clean cloth
Make sure to have all these tools ready before you begin the installation process. This will help ensure that you can complete the installation without any interruptions or delays.
Prepare Your Bike
Before installing a RAM fork stem mount on your bike, you need to ensure that your bike is prepared for the installation. Follow these steps to properly prepare your bike:
|
Step 1: Make sure your bike is clean and free of any dirt or debris. Use a mild detergent and water to clean the bike if necessary. |
|
Step 2: Inspect the fork stem area of your bike to ensure it is free of any damage or cracks. If you notice any issues, it’s recommended to have a professional bike mechanic inspect and potentially repair the area. |
|
Step 3: Measure the diameter of your bike’s fork stem using a caliper or measuring tape. The RAM fork stem mount is designed to fit specific fork stem sizes, so knowing the diameter will ensure a proper fit. |
|
Step 4: Remove any existing accessories or mounts from your bike’s fork stem to make space for the RAM mount. This includes any bike computers, phone mounts, or other accessories that may be attached. |
|
Step 5: Double-check that all necessary hardware and components for the RAM mount installation are included and in good condition. This includes the mount itself, screws, and any additional attachments. |
|
Step 6: If you are unsure about any of the steps or if you encounter any issues during the preparation process, it’s recommended to consult the user manual or contact the manufacturer for assistance. |
Remove the Old Stem Cap
To begin the installation process of a RAM fork stem mount, you will need to first remove the old stem cap from your bike. The stem cap is the piece that covers the top of the stem and is usually held in place by a bolt in the center.
Start by loosening the bolt on the top of the stem cap using an Allen wrench. Turn the wrench counterclockwise to loosen the bolt until it is completely removed. Be sure to hold onto the stem cap as you remove the bolt, as it may fall off once the bolt is released.
Once the bolt is removed, gently lift the old stem cap off of the stem and set it aside. Be careful not to drop any small parts that may be attached to the cap, such as washers or spacers. Keep these parts in a safe place so that they can be reattached later if needed.
Inspect the area where the old stem cap was removed for any dirt, debris, or corrosion. Use a clean cloth or a small brush to remove any particles that may have accumulated. This will ensure a clean and smooth surface for the installation of the new stem cap.
Install the Ram Fork Stem Mount
The Ram Fork Stem Mount is a convenient and secure way to mount various devices, such as smartphones, tablets, and GPS units, onto your motorcycle’s fork stem. Follow these steps to install the mount:
1. Start by ensuring that your motorcycle is parked on a flat and stable surface.
2. Locate the fork stem on your motorcycle. This is the vertical tube that connects the front wheel and the handlebars.
3. Remove any existing hardware or accessories from the fork stem, if necessary.
4. Take the Ram Fork Stem Mount and insert the base into the fork stem. Make sure it fits securely and is aligned properly.
5. Use the provided hex key to tighten the mount’s screws. Make sure they are tightened enough to provide a secure hold, but not so tight that they damage the fork stem.
6. Once the mount is securely installed, attach the desired device holder or cradle onto the mount. Ensure that it is properly aligned and securely fastened.
7. Double-check the tightness of all screws and connections to make sure the mount and device holder are secure.
Your Ram Fork Stem Mount is now ready to use. Enjoy the convenience and functionality it provides while riding your motorcycle!
Secure and Adjust the Mount
Once you have attached the ram fork stem mount to your bike, it’s important to make sure it is securely fastened. First, tighten the screws on the mount using a screwdriver or Allen wrench. Make sure each screw is tightened enough so that the mount doesn’t wiggle or move when you touch it.
Next, adjust the angle and position of the mount to ensure optimal visibility and comfort. Loosen the adjustment knob or bolt located on the mount and position it so that it aligns with your line of sight. Tighten the knob or bolt once you have found the desired position.
Finally, test the stability of the mount by gently shaking your bike. If the mount remains firmly in place, it is properly secured and adjusted. If it wiggles or moves, readjust the screws and repeat the process until it is stable.
