If you have a pair of Fiskars grass shears, you may find that over time, the blades become dull and less effective. One way to prolong their lifespan and maintain their cutting power is by rotating them regularly.
Rotating the blades of your Fiskars grass shears is a simple process that can be done in just a few easy steps. By doing so, you can ensure that your shears will continue to provide clean and precise cuts, allowing your lawn to look its best.
First, start by locating the two screws that hold the blades in place. These screws are usually found near the base of the shears, where the blades meet the handles. Use a screwdriver to loosen and remove these screws, being careful not to lose them.
Next, carefully remove the old blades from the shears, taking note of their original positioning. Inspect the blades for any signs of damage or wear, and replace them if necessary. It’s important to use genuine Fiskars replacement blades to ensure the best performance and compatibility.
Once you have your new blades ready, align them with the shears in the correct position. Make sure that the cutting edges are facing the right direction. Once they are properly aligned, reinsert the screws and tighten them securely. It’s crucial to ensure that the blades are securely fastened to prevent any accidents or injuries while using the shears.
Step 1: Loosen the screw
To rotate your Fiskars grass shears, you need to start by loosening the screw that holds the blades in place. Look for the screw located at the pivot point where the two blades meet. You may need to use a screwdriver or a wrench, depending on the type of screw used.
Caution: Before attempting to loosen the screw, make sure the shears are fully closed. This will prevent any accidental injuries while working on them.
Once you have the appropriate tool, insert it into the screw and turn it counterclockwise to loosen it. Be careful not to loosen it too much or remove it completely.
Note: If the screw is too tight and difficult to loosen, you can use a lubricant or penetrating oil to help loosen it up. Apply a small amount to the screw and let it sit for a few minutes before attempting to loosen it again.
Why is it important to loosen the screw?
Loosening the screw is crucial because it allows the blades to rotate freely. This rotation is necessary for adjusting the cutting angle and reaching different areas of your lawn or garden. Without loosening the screw, the blades will remain fixed in one position, limiting their functionality and effectiveness.
Step 2: Rotate the blades
Once you have properly cleaned and lubricated the blades of your Fiskars grass shears, the next step is to rotate the blades to ensure even wear and tear. By rotating the blades, you can extend their lifespan and maintain their cutting efficiency.
To rotate the blades, follow these steps:
- Unlock the blades by squeezing the handle and releasing the locking mechanism.
- Hold the grass shears firmly with one hand on the handle and the other hand on the blades.
- Rotate the blades in a counter-clockwise direction until they align with the new cutting edge.
- Make sure the blades are securely locked into position before using the shears.
By regularly rotating the blades, you can distribute the wear evenly, preventing one side from becoming dull faster than the other. This will help you maintain a clean and precise cut every time you use your Fiskars grass shears.
Step 3: Secure the blades
After rotating the blades, it is important to secure them properly to ensure safe and effective use of your Fiskars grass shears.
1. Check for any loose parts
Before securing the blades, carefully inspect the shears to make sure there are no loose parts. If you notice any loose screws or other components, tighten them before proceeding.
2. Use the locking mechanism
Fiskars grass shears are equipped with a locking mechanism to keep the blades closed when not in use. Locate the locking mechanism, usually located near the handles, and engage it to secure the blades together.
Depending on the model of your grass shears, the locking mechanism may be a slide lock, a lever, or a push button. Follow the instructions provided with your specific model to properly engage the locking mechanism.
When the blades are locked together, make sure they are aligned properly and that there is no wobbling or movement. This will ensure that the shears will operate smoothly and efficiently, providing clean and precise cuts.
It is essential to secure the blades to prevent accidental opening and potential injuries during storage or transportation. Always engage the locking mechanism when your Fiskars grass shears are not in use.
Step 4: Test the shears
Once you have successfully rotated the blades of your fiskars grass shears, it’s important to test them before using them on your lawn or garden. Testing will help ensure that the shears are properly aligned and functioning correctly.
Start by gripping the handles firmly and engaging the blades by squeezing them together. Open and close the shears a few times to see if the blades move smoothly. They should feel tight and secure without any wobbling or rubbing.
Next, test the cutting action by finding a small patch of grass or foliage to trim. Position the blades over the target area and squeeze the handles together. The shears should effortlessly cut through the grass or foliage without any resistance or tearing. If you encounter difficulty or notice rough cutting, the blades may need further adjustments.
Additionally, pay attention to the alignment of the blades. They should close evenly and meet at the tips without any gaps. If you notice gaps, it could be a sign that the blades are not aligned properly. In this case, refer back to the previous steps and make necessary adjustments.
By thoroughly testing your fiskars grass shears, you can ensure that they are in optimum condition for your lawn or garden care. Regular testing will also help you identify any issues early on and take appropriate measures to rectify them.
Maintenance and Care
Proper maintenance and care can help extend the lifespan of your Fiskars grass shears and ensure they continue to function optimally. Here are a few tips to keep in mind:
Cleaning
After each use, it is important to clean your grass shears thoroughly. Use a soft brush or cloth to remove any grass clippings, dirt, or debris from the blades. Avoid using harsh chemicals or abrasive cleaning agents, as they can damage the blades or handles.
Sharpening
Over time, the blades on your grass shears may become dull. Regular sharpening is recommended to maintain their cutting efficiency. You can use a sharpening stone or a honing tool specifically designed for grass shears. Follow the manufacturer’s instructions for the proper sharpening technique.
If you are unsure about sharpening the blades yourself, it is best to take them to a professional or contact the Fiskars customer service for assistance.
Lubrication
Lubrication is essential to ensure smooth and effortless cutting with your grass shears. Apply a few drops of oil or a silicone-based lubricant to the pivot point and the moving parts. Open and close the shears a few times to evenly distribute the lubricant.
Remember to wipe off any excess oil to prevent it from attracting dirt and debris.
Caution: Before applying any lubricant, make sure to read the manufacturer’s instructions and use an appropriate lubricant for your grass shears.
Storage
When not in use, store your grass shears in a clean and dry place. Make sure to keep them away from moisture, extreme temperatures, and direct sunlight. You can use a protective sheath or cover to prevent any accidental damage.
Following these maintenance and care tips will help keep your Fiskars grass shears in excellent condition, ready for your next cutting session.
