How to cut concrete pavers without a saw

Top Rated
Metabo HPT 4-1/2-Inch Angle Grinder
Amazon.com
Metabo HPT 4-1/2-Inch Angle Grinder
Must-Have
Evolution 12 Inch Concrete Saw
Amazon.com
Evolution 12 Inch Concrete Saw
Trending Now
Hultafors Bricklayer's Hammer TB 600
Amazon.com
Hultafors Bricklayer's Hammer TB 600
Hot Pick
DEWALT 4-1/2-Inch Angle Grinder
Amazon.com
DEWALT 4-1/2-Inch Angle Grinder

Concrete pavers are a popular choice for outdoor surfaces due to their durability and versatility. However, cutting concrete pavers can be a challenging task, especially if you don’t have access to a saw. Thankfully, there are alternative methods that you can use to cut concrete pavers without a saw.

1. Using a Chisel and Hammer

If you don’t have a saw, you can still cut concrete pavers using a chisel and hammer. Start by marking the line where you want to make the cut and then score it using a chisel. Once you have created a shallow groove, place the chisel at the edge of the groove and strike it with a hammer to break off the unwanted section.

2. Using a Cold Chisel and Brick Set

Another method you can try is using a cold chisel and brick set. This technique is similar to using a chisel and hammer, but the brick set has a wider blade that makes it easier to cut through the paver. Simply score the line with the cold chisel and then break off the unwanted section using the brick set.

Top Rated
Metabo HPT 4-1/2-Inch Angle Grinder
Compact design with powerful motor performance
This angle grinder features a 6.2 Amp motor and includes 5 grinding wheels and a hard case for portability. It provides excellent control and comfort for various grinding tasks.
Amazon price updated: August 30, 2025 1:36 pm

3. Using an Angle Grinder

If you have access to an angle grinder, you can use it to cut concrete pavers without a saw. Attach a diamond blade to the grinder and make sure you have a firm grip on the tool. Position the grinder at the starting point of the cut and slowly guide it along the marked line, applying light pressure. Be sure to wear protective eyewear and a dust mask while using the angle grinder.

Remember to always prioritize safety when cutting concrete pavers, regardless of the method you choose. Wear appropriate protective gear and take necessary precautions to prevent injuries.

While not having a saw may seem like a drawback, there are several ways you can still achieve a clean and precise cut on concrete pavers. By using alternatives such as a chisel and hammer or an angle grinder, you can complete your outdoor project with ease.

Why would you need to cut concrete pavers without a saw?

There are several reasons why you may need to cut concrete pavers without a saw.

1. Limited budget:

If you are on a tight budget or simply don’t want to invest in expensive equipment, you may choose to cut concrete pavers without a saw. This can save you money and still allow you to complete your project.

2. Limited access to power:

In some cases, you may not have access to electricity or a power source, making it impossible to use a saw. Whether you’re working in a remote location or simply don’t have a power supply nearby, cutting pavers without a saw can be a practical solution.

Note: Even without electricity, there are manual tools available that can help you cut concrete pavers effectively.

3. Noise restrictions:

In certain areas, there may be noise restrictions or regulations that prevent the use of power tools like saws. Cutting concrete pavers without a saw allows for a quieter operation that won’t disturb the peace and quiet of your surroundings.

Must-Have
Evolution 12 Inch Concrete Saw
Advanced water fed dust suppression system
With a cutting depth of 4-1/2 inches and a premium diamond blade, this electric concrete saw is ideal for masonry work and ensures compliance with OSHA dust regulations.
Amazon price updated: August 30, 2025 1:36 pm

Remember: It’s always a good idea to check local regulations before starting any project to ensure you are in compliance.

See also  Best Saw For Cutting Laminate Wood Flooring

Alternative methods for cutting concrete pavers

If you don’t have a saw available, there are several alternative methods you can use to cut concrete pavers:

1. Hammer and chisel

One of the oldest and most reliable methods for cutting concrete pavers is using a hammer and chisel. Using a chisel, score a line along the desired cutting line. Then, use a hammer to carefully strike the chisel, gradually breaking the paver along the scored line. This method requires patience and precision, but it can be effective for smaller projects.

2. Angle grinder

An angle grinder with a masonry disc can also be used to cut concrete pavers. Mark the cutting line on the paver and carefully guide the angle grinder along the marked line. Keep in mind that angle grinders can be heavy and difficult to control, so it’s important to exercise caution and wear protective gear, such as goggles and gloves.

3. Tile cutter

A tile cutter can be a handy tool for cutting concrete pavers. While tile cutters are designed for cutting ceramic and porcelain tiles, they can also be used to cut thinner concrete pavers. Simply mark the desired cutting line on the paver, then place it in the tile cutter. Use the lever to score the paver along the marked line, then apply pressure to break it along the scored line.

4. Circular saw with a masonry blade

If you have access to a circular saw, you can use it to cut concrete pavers. Attach a masonry blade to the circular saw, then mark the cutting line on the paver. Carefully guide the circular saw along the marked line, taking care to maintain a steady hand and avoid sudden movements. Make sure to wear protective gear, such as goggles and gloves, when using a circular saw.

5. Rental equipment

If none of the above methods are feasible for your project, consider renting specialized equipment for cutting concrete pavers. Renting a concrete saw or a guillotine splitter can be a more efficient and precise method for cutting large quantities of pavers or thick concrete pavers. Be sure to follow all safety instructions provided by the rental company and wear appropriate protective gear.

Remember, when working with concrete pavers or any type of cutting equipment, it’s important to prioritize safety. Always wear protective gear, such as goggles, gloves, and earplugs, and follow proper safety guidelines for the specific cutting method you choose.

Using a chisel and hammer

If you don’t have access to a saw, you can still cut concrete pavers using a chisel and hammer. While this method may be more time-consuming and require more physical effort, it can be an effective solution for smaller projects.

Trending Now
Hultafors Bricklayer's Hammer TB 600
Durable hammer designed for brick splitting
Featuring a right angle chisel and a vibration damping urethane plug, this bricklayer's hammer offers precision and comfort for professional masonry tasks.
Amazon price updated: August 30, 2025 1:36 pm

To start, you’ll want to mark the cutting line on the paver using a pencil or chalk. Make sure to measure carefully to ensure a precise cut.

See also  How to cut a metal pole without a saw

Next, using a cold chisel and a hammer, place the chisel at the beginning of the cutting line. Using the hammer, strike the back of the chisel firmly and repeatedly to create a groove in the paver.

Continue striking the chisel down the cutting line, moving the chisel back and forth to widen the groove. Apply steady pressure and make sure to strike the chisel directly on the line to maintain accuracy.

Once you have carved a deep groove into the paver, flip it over and repeat the process on the other side. This will help ensure a clean cut through the entire thickness of the paver.

After both sides have been grooved, position the chisel in the middle of the groove on one side and strike it with a hammer to break the paver in half. Use caution to avoid injury and wear appropriate protective gear.

If the paver is thick and difficult to break, you can use a larger chisel and a heavier hammer to make the process easier.

Remember that cutting concrete pavers with a chisel and hammer can be a strenuous task, so take breaks when needed and use caution to avoid injury.

Using a concrete block splitter

Another option for cutting concrete pavers without a saw is to use a concrete block splitter. This tool is specifically designed to split concrete blocks and can be a useful alternative if you don’t have access to a saw.

Step 1: Gather necessary tools and materials

Before using a concrete block splitter, gather the following tools and materials:

  • Concrete block splitter
  • Safety glasses
  • Gloves
  • Chalk or pencil
  • Straightedge or level

Step 2: Prepare the paver

Mark the desired cutting line on the paver using chalk or a pencil. Use a straightedge or level to ensure the line is straight and accurate.

Step 3: Position the paver

Place the paver on a stable surface and position it so that the cutting line is aligned with the blade of the concrete block splitter.

Step 4: Split the paver

Using the concrete block splitter, apply steady pressure to the top handle to gradually split the paver along the marked cutting line. It is important to maintain a consistent pressure to ensure a clean cut.

Step 5: Clean up

Once the paver is split, remove any debris and smooth any rough edges using sandpaper or a concrete file.

Remember to always wear safety glasses and gloves when using a concrete block splitter to protect yourself from flying debris and sharp edges.

Using a diamond blade on an angle grinder

If you don’t have a saw, you can still cut concrete pavers with an angle grinder equipped with a diamond blade. Here’s how:

Step 1: Gather the necessary tools and safety equipment

Before you start, make sure you have the following:

  • An angle grinder
  • A diamond blade specifically designed for cutting concrete
  • Safety goggles
  • Ear protection
  • Gloves
  • A dust mask

Step 2: Prepare the paver and mark the cutting line

Clean the paver and mark the desired cutting line using a pencil or chalk. Make sure the line is straight and precise.

Step 3: Secure the paver

Place the paver on a sturdy surface, such as a workbench or a pair of sawhorses. Secure it in place to prevent it from shifting during the cutting process.

See also  How much does a dewalt table saw weight

Step 4: Put on safety gear

Wear safety goggles, ear protection, gloves, and a dust mask to protect yourself from flying debris and dust.

Step 5: Start cutting

Hold the angle grinder firmly with both hands. Position the diamond blade at one end of the marked cutting line and slowly lower it onto the paver. Apply gentle pressure and let the blade do the work. Move the grinder along the cutting line with a steady and controlled motion. Avoid putting too much pressure on the blade, as it can cause overheating and damage.

Step 6: Complete the cut and remove excess material

Continue cutting along the marked line until you reach the end. Once the cut is complete, switch off the angle grinder and carefully remove the excess material.

Step 7: Smooth the edges (optional)

If desired, you can use a masonry stone or sandpaper to smooth the rough edges of the cut paver for a cleaner finish.

Step 8: Clean up

After you finish cutting the paver, clean up the area. Dispose of any debris and dust properly.

Note: Cutting concrete pavers with an angle grinder can be noisy, dusty, and potentially hazardous. Always follow safety guidelines and use the appropriate safety equipment.

Tips for cutting concrete pavers without a saw

When it comes to cutting concrete pavers without a saw, there are a few methods you can try. While using a power saw is often the easiest and most efficient way to cut concrete pavers, not everyone has access to one. Here are some alternative methods you can use:

1. Chisel and hammer: If you only need to make small cuts or have a few pavers to cut, a chisel and hammer can be a suitable option. Use the chisel to score the paver along the desired cutting line, then place the chisel on the scored line and tap it with the hammer gently until the paver splits along the score line.

Hot Pick
DEWALT 4-1/2-Inch Angle Grinder
One-touch guard for easy operation
This angle grinder boasts a powerful 7 amp motor and a slim design for comfort during extended use, making it perfect for quick material removal tasks.
Amazon price updated: August 30, 2025 1:36 pm

2. Angle grinder: An angle grinder is a versatile tool that can be used to cut through a variety of materials, including concrete pavers. Choose a diamond blade specifically designed for cutting concrete, secure the paver firmly, and carefully guide the grinder along the cutting line.

3. Masonry saw blade on a circular saw: If you have a circular saw but not a masonry-specific blade, you can still use it to cut concrete pavers by attaching a masonry saw blade. Make sure the blade is securely attached, and follow the same guidelines as cutting with an angle grinder.

Remember to always wear protective gear, such as safety glasses and gloves, when cutting concrete pavers. Work in a well-ventilated area to minimize the amount of dust created, and take breaks if needed to prevent muscle fatigue.

By following these tips and being cautious, you can successfully cut concrete pavers without a saw. However, if you have a large number of pavers to cut or need precise and clean cuts, it may be worth considering renting or borrowing a power saw to ensure the best results.

Mark Stevens
Mark Stevens

Mark Stevens is a passionate tool enthusiast, professional landscaper, and freelance writer with over 15 years of experience in gardening, woodworking, and home improvement. Mark discovered his love for tools at an early age, working alongside his father on DIY projects and gradually mastering the art of craftsmanship.

All tools for you
Logo