If you are looking to improve the accuracy and performance of your firearm, installing an Accu Wedge is a great option. The Accu Wedge is a small rubber piece that is placed between the lower receiver and the upper receiver of your rifle. This simple yet effective device helps eliminate play between the receivers, resulting in increased accuracy and reduced recoil.
Installing an Accu Wedge is a straightforward process that can be done by anyone with basic knowledge of firearms. To start, make sure your firearm is unloaded and all ammunition is removed from the area. Safety is always the top priority when working with firearms.
Once your firearm is clear, disassemble the upper and lower receivers. Slide the Accu Wedge into the space between the receivers. It should fit snugly and fill any gaps or play that may exist. Reassemble the firearm and ensure that everything is tightened securely.
When installed correctly, the Accu Wedge will help improve the overall accuracy of your firearm by reducing movement between the upper and lower receivers. It also helps reduce the amount of recoil felt when firing. With a more stable and accurate firearm, you can expect to see tighter groups on the target and improved shooting performance.
Remember to always consult the manufacturer’s instructions for your specific firearm and follow all safety guidelines. With the proper installation of an Accu Wedge, you can enhance the performance of your firearm and enjoy a more accurate shooting experience.
Accu wedge installation guide
Installing an Accu wedge can help improve the performance of your firearm by reducing movement and vibrations between the upper and lower receivers. This simple device can provide a tighter fit, resulting in increased accuracy and reliability.
Step 1: Gather the necessary materials
Before you begin, make sure you have all the tools and materials you need for the installation:
- – Accu wedge
- – Firearm (upper and lower receiver)
- – Cleaning supplies
- – Safety glasses
- – Workbench or sturdy surface
- – Small punch or screwdriver
Step 2: Clean the upper and lower receiver
Ensure that both the upper and lower receiver are free from any dirt, debris, or lubricants. Use cleaning supplies to thoroughly clean and dry the surfaces before proceeding.
Step 3: Insert the Accu wedge
With the upper and lower receiver separated, carefully insert the Accu wedge into the rear takedown pin hole on the lower receiver. Make sure the Accu wedge is aligned with the takedown pin hole.
Step 4: Reassemble the firearm
Bring the upper and lower receivers back together, aligning the pinholes. Gently push the upper receiver down until it fully engages with the lower receiver. You may need to apply slight pressure to ensure a tight fit.
Note: Be cautious not to force the receivers together, as this may cause damage to the firearm.
Step 5: Test the fit
Once the firearm is reassembled, check the fit by attempting to wiggle the upper and lower receivers. If the Accu wedge is properly installed, you should notice a decrease in movement and a tighter fit between the receivers.
Congratulations! You have successfully installed the Accu wedge. Take your firearm to the range and test its improved performance.
Step 1: Gather the necessary tools
Before starting the installation process of the accu wedge, it is essential to gather all the necessary tools to ensure a smooth and efficient installation. Here are the main tools you will need:
1. Accu wedge: Make sure you have the accu wedge itself, which is a small rubber or polymer wedge that is inserted between the upper and lower receivers of the AR-15 rifle.
2. AR-15 rifle: You will need an AR-15 rifle to install the accu wedge. Ensure that the rifle is unloaded and in a safe condition before proceeding with the installation.
3. Cleaning supplies: It is recommended to clean the rifle before installing the accu wedge. Gather the necessary cleaning supplies such as a cleaning rod, brushes, cleaning solution, and patches.
4. Punch set: A punch set is useful for pushing out pins and detents during the installation process. Make sure you have a punch set that includes different sizes to accommodate various parts of the rifle.
5. Mallet or hammer: A mallet or hammer is necessary for tapping the pins back into place after installing the accu wedge.
6. Safety glasses: It is essential to wear safety glasses throughout the installation process to protect your eyes from any potential hazards.
7. Workbench or stable surface: Find a sturdy workbench or stable surface where you can comfortably work on the rifle without any risk of damaging the firearm or its components.
Note: Make sure to refer to the accu wedge manufacturer’s instructions for any additional tools or specific requirements.
Step 2: Prepare the lower receiver
Before installing the accu wedge, you need to prepare the lower receiver of your firearm. Follow the steps below:
-
Clean the lower receiver
Use a cleaning solution and a brush to thoroughly clean the lower receiver. Remove any dirt, debris, or oil that may be present.
-
Inspect the lower receiver
Inspect the lower receiver for any signs of damage or wear. Make sure there are no cracks, dents, or loose parts that could affect the installation of the accu wedge.
-
Apply lubrication
Apply a small amount of gun lubricant to the lower receiver. This will help facilitate the installation of the accu wedge and ensure smooth operation of the firearm.
Once you have completed these steps, you are ready to move on to the next step of the installation process.
Step 3: Insert the accu wedge
Step 3: Once you have your lower receiver prepared and the rear takedown pin is removed, it’s time to insert the accu wedge. The accu wedge is a small rubbery piece that helps eliminate any play or wiggling between the upper and lower receivers.
Note: Some firearms may not require an accu wedge, so be sure to check your firearm’s specifications.
To insert the accu wedge, simply place it on top of the magazine catch, ensuring it is centered and aligned with the takedown pin holes. Press down firmly on the upper receiver, allowing the accu wedge to slide into place between the upper and lower receivers.
Tip: You may need to use a little force to properly insert the accu wedge, but be careful not to use too much force as it can cause damage to the firearm.
Once the accu wedge is in place, you can now proceed to reassemble the firearm by reinserting the rear takedown pin and ensuring it is secured.
Step 4: Test the accu wedge
After installing the accu wedge, it is important to test it to ensure proper functionality and performance. Follow the steps below to test the accu wedge:
1. Insert a magazine
First, make sure the firearm is unloaded by removing any ammunition or magazines. Then, insert a magazine into the gun.
2. Push the wedges into place
Using your finger or a small tool, push the accu wedge firmly into place against the rear of the upper receiver and the front of the lower receiver.
Note: It is important to ensure the wedges are properly seated and secure.
3. Perform function tests
With the accu wedge in place, perform a series of function tests to check the reliability and stability of the firearm. This includes:
- Manipulating the charging handle
- Performing dry fire exercises
- Checking for any play or movement in the upper and lower receivers
Pay close attention to any changes in the firearm’s performance or stability. A properly installed accu wedge should help minimize or eliminate any movement between the upper and lower receivers.
If you encounter any issues or notice any abnormal movement, consult the manufacturer’s instructions or seek the assistance of a knowledgeable gunsmith.
Step 5: Secure the upper receiver
Now that you have properly installed the Accu Wedge, it’s time to secure the upper receiver to ensure stability and proper functioning of your firearm. Follow these steps:
1. Begin by inserting the front takedown pin through the hole located on the front of the lower receiver, just above the trigger guard.
2. Place the upper receiver onto the lower receiver, aligning the front and rear takedown pin holes.
3. Once aligned, push the front takedown pin all the way through the upper and lower receivers until it clicks into place.
4. Repeat the same process for the rear takedown pin, aligning the holes and pushing the pin through until it clicks into place.
5. With both takedown pins in place, make sure they are secure and flush with the receiver. They should not wiggle or move when pressure is applied.
6. Finally, check that the upper receiver is securely attached by attempting to move it. It should be snug and not have any noticeable play or movement.
By properly securing the upper receiver, you are ensuring that the rifle remains stable during use and that the components are properly aligned for optimal function.
